Axiom’s new tweeter
In a recent post on our message boards, Message Board Member Eggman asked “Would you happen to know if Axiom makes all their speaker parts in-house? Just curious.”
It’s a great question, and it was followed up by MichaelTrottar asking “is that for a better sound quality….?”
There are two main reasons for manufacturing our own parts: sound quality and consistency.
The sound quality is achieved by having more options available to us when designing the finished product. If you are selecting your drivers from already available parts then you only have the crossover and the cabinet as variables that you can completely control in the design process.
Continue reading Why We Make Our Own Drivers » Log in
Today we’re going to start a series of videos that covers the basics of loudspeaker placement and set up, and it’s going to be heavily driven by your input and questions that you have. On our forums under the “What’s New” section, you’ll see a thread that I started a few days ago that asks for input on what questions that you want answered, no matter how simple: we really want to cover off topics that you’re interested in or wondering about. Please post any suggestions there, or in the comments below. (Note: please pardon the sound of the dust collector in the background – hazard of having our offices attached to our factory!)
Today we’re going to start off with some basics of bookshelves and center channels. One of the biggest mistakes people make when they place a bookshelf speaker or center channel on a shelf is that they bury them in the cabinet. A lot of times this is for aesthetic reasons, but acoustically it’s pretty much one of the worst things that you can do.
What will happen with a speaker even an inch or two behind the front edge of the shelf, it will create reflections that will muffle the sound or destroy the image. You’ll get a very colored sound quality from your center channel or your bookshelf speaker.
What you want to do is make sure the speaker is sitting as flush as possible or proud of the front edge of the shelf in the cabinet. This will give you far better acoustic performance.
Continue reading Speaker Placement Series Part 1 »
We have recently started shipping our newest product, the M100 Floorstanding Speaker, which is the first model of ours to come with port plugs. A port plug, as its name suggests, is simply something that will plug one of the loudspeaker ports, keeping air from moving in and out of the cabinet.
There are a number of reasons why you might want to use these, and they are going to be offered on the website as an accessory, so I’ll also cover where you might want to use these other than for the model M100.
When you place a loudspeaker in a room, if it has to be close to anything called a room boundary (back walls, side walls), you get something called boundary reinforcement happening. Boundary reinforcement will tend to accentuate the mid-bass frequencies. In a speaker like the M100 that has very good low frequency extension and output capabilities, you can easily end up with ‘too much of a good thing’ in those environments. And if you’re in a small listening room or environment, you can find that because everything is closer to the boundaries that you’ll also get that midbass accentuation, which can be too much of a good thing and can actually make things sound really slow and congested.
[Not a valid template]
Continue reading When Should You Use Port Plugs? »
It happens every year, doesn’t it? You get asked what you want for the holidays and your mind goes blank. Deer-in-headlights looks ensue, followed by a sheepish shrug, and then . . . the unmistakable disappointment of yet another tool or tie waiting for you . . .
Don’t worry – we’ve got you covered! Â Just print out this handy 5.1 Audiophile and Movie Buff Gift Guide, circle the one you really want, and leave it out conspicuously! Â You’re sure to get something you love this year.
1. Â The Beatles In Stereo Vinyl Box Log in
Continue reading What To Get Home Theater Lovers For The Holidays »