No, not at all...

Drop hammer, open mainspring housing latch, lift out and pull down, reach in with a dental pick and pull the hammer spur away from the frame, remove bolt, hold grip, pull barrel forward and off.

To reassemble - do the reverse, remembering to put the hammer all the way back before putting in the bolt, and then raising the hammer up (with the trigger pulled) before putting in the mainspring housing and making sure to tip the barrel facing up while you lock in the latch again.

I usually disassemble the bolt (easy to do - spring fit) and firing pin (drift out the one roll pin) every second time I have it apart, and do the full down-to-the-frame strip and clean maybe once a month (especially since the trigger return spring and nub get coked up pretty quick giving you a gritty trigger)

I also don't use cleaning rods and jags, I clean everything but my inline with boresnakes.

Bren R.