Originally Posted By: jakewash
Just run both W22s on one output and crank it up, this would simulate an M80 load quite nicely ;\)

It's funny that you would say that. That's the one thing which the SC-07 seemed to have a lot trouble (according to the Audioholics' review), running into one full bandwidth channel with a 4 Ohm load. Anything above 5kHz would shut the amp down when going higher than 100 Watts. Two channels with 4 Ohms each were fine providing 150 W/c. The reviewer found this to be strange (that one channel would provide less power than 2), but figured it had something to do with the symmetrical load balancing on the power supply.

This matters little in the real world. Especially considering that even the M80 is well above 4 Ohms at frequencies >5kHz

Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris