Dave(kpro), Audyssey was not even born yet when I got my 2805. My receiver only allows for ONE crossover point for all speakers. It does have a built in setup that finds distance, dB levels, and EQ. I've never used the EQ part as it made my Axioms sound bad, with to much midrange. The distance and dB levels are fairly accurate.

I know you placed the question on the Audyssey forum at AVS, so I'm sure Chris will respond. The Q's are rated around 90hz +/- 3dB, so in my opinion the 150hz is to high for the rears, as you know Audyssey was correct on the sides. The Q's can put out some potent bass, so hopefully it is a placement issue, and you can retest.

There have been others on the AVS forum that have found that they have had to slightly tilt the mic or elevate it some to get accurate readings for certain speakers.

M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85