What Axiom subwoofer(s) do you own?
2X EP-600, with a 3rd in the works..
Where do you have the Level, Frequency, Phase, and Subsonic Filter (if applicable) controls set?
the above settings are mostly the same on both, so i am only listing them once.
Level- 12:30, Frequency-80hz, Phase-180 on one and 0 on the other, Subsonic filter-on
How are you connecting your signal source to the subwoofer (RCA/XLR/High Level)?
currently using RCA's, I tried XLR, and i believe Brent talked with you about this Andrew.. The gain on the XLR input path on the current amps is 6db or so lower than the RCA's.. The XLR input on the current amps is pretty much unusable due to the difference in gain, which results in a VERY reduced max volume.
What receiver/processor/pre-amp/integrated amplifier are you using?
Krell HTS 7.1
What are you using for your main speakers?
LFR's
Where do you have the crossover frequency and trim levels set in your processor/receiver for your main speakers and your Axiom subwoofer?
Cross over is set to 80hz for the Subwoofer within the processor
Are you using the trigger on your subwoofer?
Not using the trigger due to issues.
Many, many thanks for your input!
No problem, glad to help....
