Previous Thread
Next Thread
Print Thread
Rate Thread
M3's or M22's for Surrounds
#143324 07/11/06 11:49 PM
Joined: May 2006
Posts: 4
newbie
OP Offline
newbie
Joined: May 2006
Posts: 4
I bought 2xM-60's, 1xVP-150, 2xQS-8's, & an EP-350 a few months ago. Wouldn't ever go back to what I had. Never even considered returning them either. I'm thinking about getting the same setup for my father, but the room they would be placed in isn't suitable for the quadpolar QS8's. So with the above mentioned setup, I'm looking for advice on whether to get M3's or M22's to serve as the surrounds. I appreciate any feedback.

Re: M3's or M22's for Surrounds
TrapVector #143325 07/12/06 01:08 AM
Joined: Jun 2006
Posts: 533
Jc Offline
aficionado
Offline
aficionado
Joined: Jun 2006
Posts: 533
Hi TrapVector,

I would be very curious to see a sketch of your parents’ room. Axiom has tested a multitude of different room configurations and there was not a single one where a direct or di-pole speaker was superior to an Axiom QS “Quadpolar” speaker.
- - - - - - - - - - - - - - -
Jc
Axiom Audio Expert
jc@axiomaudio.com

Re: M3's or M22's for Surrounds
TrapVector #143326 07/12/06 01:31 AM
Joined: Dec 2005
Posts: 3,301
connoisseur
Offline
connoisseur
Joined: Dec 2005
Posts: 3,301
I'm guessing for your fathers room it is more of a placement issue rather than not wanting the QS8's, I think you would be fine with either choice as a surround, I'm sure someone will jump in and comment on which of the two would match best with the M60's sound wise.


A computer once beat me at chess, but it was no match for me at kick boxing.
Re: M3's or M22's for Surrounds
TrapVector #143327 07/12/06 05:52 PM
Joined: Feb 2004
Posts: 1,703
connoisseur
Offline
connoisseur
Joined: Feb 2004
Posts: 1,703
M2's as surround perhaps?

Re: M3's or M22's for Surrounds
TrapVector #143328 07/12/06 07:44 PM
Joined: Jan 2002
Posts: 3,270
connoisseur
Offline
connoisseur
Joined: Jan 2002
Posts: 3,270
Hi TrapVector,

If you'd prefer to use direct radiators for surrounds, the M22 and M2 tonal balance is closer to the M60s than the M3s'.
If the room is on the larger side (greater than 2,500 cu. ft), get the M22s, if smaller, the M2s will be fine.


Alan Lofft,
Axiom Resident Expert (Retired)
Re: M3's or M22's for Surrounds
alan #143329 07/13/06 10:18 PM
Joined: May 2006
Posts: 4
newbie
OP Offline
newbie
Joined: May 2006
Posts: 4
Hello Jc, Homedad, INANE, and Mr. Loft.
Placement is indeed the issue at hand. Their family room where the speakers will go opens to a kitchen, which is separated by a three foot high ledge. Their couch is pushed back against the ledge. The surround speakers would sit on either side of this ledge, which is why I don't want to get the QS8's. That said, the room is 17.5 x 13.5 feet, so I think that's just under 2500 cubic feet. Looks like M2's it is. I appreciate all the advice. I know it is honest.

Re: M3's or M22's for Surrounds
TrapVector #143330 08/19/06 06:09 PM
Joined: Jun 2005
Posts: 2
A
newbie
Offline
newbie
A
Joined: Jun 2005
Posts: 2
This reply may be late, but helpful..
I have a 7.1 (actually a 6.1) set-up. Fronts are M-22tis, VP-150 Center, QS-8's for surrounds, and M-2's for rear surrounds.

I started with a second set of QS-8's for the rear surrounds, but because of the open nature of my theater room I was not happy with the second set of QS-8's. I returned them for a pair of M2's so the rear surround was directed back at the listening environment.

I COULD NOT BE MORE IMPRESSED...

I highly recommend this set-up. I have an SVS 25-31+ sub and my basement thunders when I watch movies.

I love the QS-8's, they just were not right for my setting.

Just my humble opinion and advice..

AB

Re: M3's or M22's for Surrounds
TrapVector #143331 08/19/06 08:20 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
I would also like to see a sketch, normally the surrounds for 5.1 go to the left/right of the listening position, unless you don't have that as an option. I prefer the Q's for surrounds, but that is just me.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85



Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,943
Posts442,465
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 485 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4