Previous Thread
Next Thread
Print Thread
Rate Thread
QS8 Settings...
#164649 04/11/07 01:23 PM
Joined: Sep 2006
Posts: 14
M
frequent flier
OP Offline
frequent flier
M
Joined: Sep 2006
Posts: 14
I recently got everything hooked up for my system. I have M22's, VP150, and QS8's, HSU VF3-MK3 and an H/K AVR 635. I have my QS8's mounted on a wall directly behind my couch where I sit. On the receiver I have them plugged into Rear Surround L/R. Is that the correct place that they should be plugged in at or should they be in Surround L/R on the AVR? I am not getting any sound out of them on DVD's like True Lies or The Matrix. When I ran them through H/K's EzSetup they were recognized and everything went fine. What should I do? Thanks in advance...

Ryan

Re: QS8 Settings...
masse1369 #164650 04/11/07 01:25 PM
Joined: Jun 2005
Posts: 1,189
connoisseur
Offline
connoisseur
Joined: Jun 2005
Posts: 1,189
No, they should be connected to the Side/Main Surround, not the rear. You'll get much better results there.

Re-connect them properly, and then run the setup again.


-Dave

M80s VP150 QS8s EP500s
ravenmanor.com/cinema/
Re: QS8 Settings...
masse1369 #164651 04/11/07 01:25 PM
Joined: Feb 2007
Posts: 601
aficionado
Offline
aficionado
Joined: Feb 2007
Posts: 601
Surround L/R


Made on a Mac
Re: QS8 Settings...
masse1369 #164652 04/11/07 01:28 PM
Joined: Jul 2006
Posts: 2,102
connoisseur
Offline
connoisseur
Joined: Jul 2006
Posts: 2,102
for a 5.1 system (sounds like you have a 5.1 system) your surrounds should be to the side of your listening area, and plugged unto the L/R surround outputs. The reason you are not getting any content from your "rear" surrounds is because there are not alot of dvd's that actually use the 6th channel (for mono 7.1) in surrounds.

This diagram should give you an idea of how your setup should be (if you can do it like this, it would be ideal)



Now, you can have your surrounds a bit further back from your listening position (mabey 2-3 feet) depending on your preference. But they should be to the SIDES of your listening position if you can.

But to answer your question, you have them plugged into the wrong jacks, they should be plugged into the L/R surround outputs.


Producer | Composer
www.robbhutzal.com
Re: QS8 Settings...
Hutzal #164653 04/11/07 02:52 PM
Joined: Sep 2006
Posts: 14
M
frequent flier
OP Offline
frequent flier
M
Joined: Sep 2006
Posts: 14
Thank you very much, that did the trick. These speakers are incredible...

Re: QS8 Settings...
masse1369 #164654 04/11/07 03:37 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
If possible, you may want to move them to the left/right of the listening area for 5.1 best results, unless you don't have that option.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: QS8 Settings...
masse1369 #164655 04/12/07 01:29 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Yes Ryan, since they're still side surrounds in a 5.1 setup, regardless of being mounted on the back wall, if you meant "directly behind" the couch literally it'd be better to separate them more, at least a few feet wider than the ends of the couch.


-----------------------------------

Enjoy the music, not the equipment.



Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,475
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
3 members (rrlev, Hambrabi, Kodiak), 740 guests, and 5 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4