Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
M60s with Crown Amplifier XTi 4000
#232248 12/01/08 02:01 AM
Joined: Dec 2008
Posts: 6
J
Jake Offline OP
regular
OP Offline
regular
J
Joined: Dec 2008
Posts: 6
Hello,

Thanks for reading this post.

I have a Crown Amp XTi 4000, which I used to hook up to my $300 karaoke speakers (BMB CS-500). This setup sounds better than my M60s/Onkyo NR801 (Both for normal music and karaoke). So I was thinking the M60s were 3 times more expensive than BMB CS-500, how could the BMBs sound better. It must be the Crown Amp vs the Onkyo. So I hooked up the BMBs to the Onkyo. It's hard to tell whether this setup is better than M60s/Onkyo.

What I want to try is to hook up the M60s to the Crown Amp XTi 4000, which is rated at 650W/8ohms/channel. However, the M60s is rated only 250W/8ohms.

My Questions:

1) If I hook the XTi4000 to M60s, would it pop or blow up the M60s?

2) Is M60s rated 250W Peak or 250W RMS?

If someone has some experience with Crown Amp and Axiom Speakers, please suggest or share the experience.

Thanks much for your time,
Jake

Re: M60s with Crown Amplifier XTi 4000
Jake #232249 12/01/08 02:12 AM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833

You could go ahead and hook the crown amp to the M60s. They are rated at 250 watts rms. It's doubtful if you will over drive the Axioms with the Crown.

It could be a problem with the Onkyo.


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: M60s with Crown Amplifier XTi 4000
Wid #232251 12/01/08 02:19 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
It could also be you just prefer the sound of the other speakers in question. What sort of music are you playing on the Axioms and is it from the same source as the BMB's are getting. many things could be giving you this difference.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: M60s with Crown Amplifier XTi 4000
jakewash #232259 12/01/08 02:32 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
The 80's are rated at 400 which is very conservative, based on lab tests exceeding 1,000 watt peaks. I'm sure the 60's are also a conservative rating. You will cause more harm to speakers if you have low power versus more.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: M60s with Crown Amplifier XTi 4000
jakewash #232340 12/01/08 05:43 PM
Joined: Dec 2008
Posts: 6
J
Jake Offline OP
regular
OP Offline
regular
J
Joined: Dec 2008
Posts: 6
I used the same source when comparing them. Also tried different kind of music (different Original CDs). I let two other people listen without letting them know what setup being played. Basically, it was a blind test for all 3 of us, and we all agreed with each other.

Re: M60s with Crown Amplifier XTi 4000
Wid #232341 12/01/08 05:52 PM
Joined: Dec 2008
Posts: 6
J
Jake Offline OP
regular
OP Offline
regular
J
Joined: Dec 2008
Posts: 6
Rick,

What do you mean by "problem with the Onkyo"? Is it not strong enough to drive the M60s? or Is its power nothing compared to the crown amp?

Anyway, thanks for your feedback. I will hook it up to see what happen. The worst case is that I still have the BMBs. Or perhaps I can send in for replacement because it's still under warranty...:-)

Re: M60s with Crown Amplifier XTi 4000
Jake #232344 12/01/08 06:13 PM
Joined: Jun 2003
Posts: 6,833
W
Wid Offline
axiomite
Offline
axiomite
W
Joined: Jun 2003
Posts: 6,833

I don't know what your other speakers sound like but the Axioms should sound pretty darn good in their own right. How is it you have the Onkyo set up?

What kind of system do you have the M60s in? Stereo H/T? How are your setting in the Onkyo?


Rick


"A fear of weapons is a sign of retarded sexual and emotional maturity." Sigmund Freud

Re: M60s with Crown Amplifier XTi 4000
Wid #232345 12/01/08 06:15 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
It would be hard to believe that those bar speakers would sound better than m60's, all things being equal.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: M60s with Crown Amplifier XTi 4000
Jake #232346 12/01/08 06:44 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
 Originally Posted By: Jake
I used the same source when comparing them. Also tried different kind of music (different Original CDs). I let two other people listen without letting them know what setup being played. Basically, it was a blind test for all 3 of us, and we all agreed with each other.
It could be the M60s are revealing poor qualities of the recording, and the BMB's are hiding it, making them sound better.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: M60s with Crown Amplifier XTi 4000
jakewash #232352 12/01/08 06:57 PM
Joined: Sep 2008
Posts: 4,116
connoisseur
Offline
connoisseur
Joined: Sep 2008
Posts: 4,116
I could not find a website of the manufacturer of these speakers?
It seems there main use is intended for karaoke, not critical listening?


I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.

-Max Payne
Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,477
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 963 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4