Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
Re: Another Audyessy question
SirQuack #242566 01/25/09 03:45 AM
Joined: Feb 2004
Posts: 309
devotee
OP Offline
devotee
Joined: Feb 2004
Posts: 309
I'll have to try it again tomorrow and compare the results. Any theories on why I'm getting the weird sub distance readings? I've done the sub crawl and the present position is the best of all possible options.


I started out with nothing & I've still got most of it left
M60 VP160 QS8 EP350
M22 VP100
Algonquins
Re: Another Audyessy question
SirQuack #242576 01/25/09 04:50 AM
Joined: May 2008
Posts: 200
local
Offline
local
Joined: May 2008
Posts: 200
 Originally Posted By: sirquack
Hey Dave, none of your Home Theater website pictures are working, fyi....


Thanks. I am redoing my site and got really started deleting without thinking. They are working again.

Re: Another Audyessy question
Joe_in_SC #242578 01/25/09 04:56 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Joe, as to difference in the level readings, as I've commented before, there's no good reason to believe that the SPL reading taken with a separate meter(and with human error in reading it possibly a factor)is more accurate(or as accurate)than the result from the Audyssey microphone and built-in meter.

Where the sub difference is shown as being significantly shorter than the actual distance, this would seem to indicate that a nearby reflection is affecting the result. If you had the microphone positioned clear of obstructions for the first central reading, maybe you should try another first reading from about 6-7' away from the sub even if not in the listening position , to see if a similar short measurement results.


-----------------------------------

Enjoy the music, not the equipment.


Re: Another Audyessy question
dewd #242627 01/25/09 04:20 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
pictures are working again Dave, but it is VERY slowwwwww. Are you hosting your own website? I've got broadband and this is reminding me of the old dial-up days....


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Another Audyessy question
JohnK #242628 01/25/09 04:32 PM
Joined: Feb 2004
Posts: 309
devotee
OP Offline
devotee
Joined: Feb 2004
Posts: 309
That's a good idea John. If I take just a first reading to verify the setup, will that give me the sub distance? Or will I have to go through the whole multi-position routine? My receiver needs a minimum of 3 readings before it will do the calculations.

I was trying to analyze this situation (the way we engineers tend to do), and it's probably not such a big deal as I'm making it out to be. After all, the distance setting is used to calculate a delay time in microseconds. It seems unlikely that a difference of a couple of thousandths of a seconds would even be noticeable, especially with a long low frequency wave.


I started out with nothing & I've still got most of it left
M60 VP160 QS8 EP350
M22 VP100
Algonquins
Re: Another Audyessy question
Joe_in_SC #242631 01/25/09 04:41 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
If your a member on the AVSforum, there is an Audyssey thread in the Audio Receivers/Amps section. Chris from Audyssey is a regular and maybe he could help answer these questions...


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Another Audyessy question
Joe_in_SC #242734 01/26/09 03:18 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Joe, the first Audyssey reading(usually from the main listening position)is the one that sets the speaker levels, crossovers and distances; the remaining readings are for the purpose of room equalization adjustments. So, if you decide to try the first reading at different positions to check what the sub distance shows, use the least number of readings that give you a result for sub distance.


-----------------------------------

Enjoy the music, not the equipment.


Re: Another Audyessy question
Joe_in_SC #242798 01/26/09 02:37 PM
Joined: Jan 2002
Posts: 3,270
connoisseur
Offline
connoisseur
Joined: Jan 2002
Posts: 3,270
Hello Joe,

While we'd all like to believe that Audyssey's automatic calibration and EQ is an audio panacea, it isn't, and it's error prone. I suggest you use your Radio Shack Sound Pressure Meter and adjust the levels and distances manually. You can tweak the levels of your surround speakers, subwoofer and center channel by ear if necessary later on.

Leave Audyssey Equalization switched off. As you've discovered, with really linear speakers like Axioms, Audyssey may degrade sound quality.

Incidentally, it is pink noise (not white noise) that is used. Pink noise has equal energy per musical octave; white noise has equal energy per frequency, so it's heavily biased towards the upper midrange and high frequencies.

Regards,

Alan


Alan Lofft,
Axiom Resident Expert (Retired)
Re: Another Audyessy question
alan #242834 01/26/09 05:27 PM
Joined: Dec 2008
Posts: 505
B
aficionado
Offline
aficionado
B
Joined: Dec 2008
Posts: 505
Is this a good product with the meter bundle?

http://www.svsound.com/products-parts-avia.cfm

Last edited by BoB/335; 01/26/09 05:30 PM.
Re: Another Audyessy question
BoB/335 #242836 01/26/09 05:30 PM
Joined: Feb 2005
Posts: 5,210
axiomite
Offline
axiomite
Joined: Feb 2005
Posts: 5,210
Bob, several of us here do use the Avia disc ... it's worth having.


Rick
Our Room

smile
Page 2 of 3 1 2 3

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 145 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4