Previous Thread
Next Thread
Print Thread
Rate Thread
Page 83 of 90 1 2 81 82 83 84 85 89 90
Re: VP180
JohnK #314607 07/14/10 04:07 AM
Joined: May 2010
Posts: 310
devotee
Offline
devotee
Joined: May 2010
Posts: 310
my QS8 surrounds will be here Thursday. then my speaker upgrade is complete. 5 speakers, M80, VP180 & QS8 all in the V3 flavor!
i'll keep you all posted when they arrive. i'll probably post in a QS8 thread i saw.

well, Tuesday night to celebrate and "break it in" (the new center) we watched Percy Jackson and it was truly incredible. the front soundstage is like i've never heard it before and it's only set at 50hz (i'm gonna give 40hz a try tomorrow, though 50hz was quite impressive ) for the front 3 and they are thunderous! these are truely special speakers and if you've got the power they will take it and turn that power into brilliant, spacious sound with true purpose. when the minatour comes after Percy or the Hydra attacks and screams and stomps it was like really being in the movies for us for the first time and we didn't have it turned up loud either, in fact it was at the lower end of where we tend to watch movies. i watch them at (volume) 55 or 60 (mostly closer to 60) but for Percy it was at 55 but it almost sounded like it was at 65! i was really impressed and happy to see that my money was spent on such a good investment. i am sure i can get rid of my boxes in about another week, i have no doubt that these speakers will stand the test of time with their build quality and i am also certain that i want to keep them!


SonySXRD55"
Marantz AV7702MKII pre-amp
Emotiva XPA-5,UPA-2amps,
14 Speakers, All Axiom
Oppo 105D&93
Re: VP180
solarrdadd #314634 07/14/10 01:42 PM
Joined: Jun 2008
Posts: 769
aficionado
Offline
aficionado
Joined: Jun 2008
Posts: 769
You might also want to try leaving the Xover at 50Hz and have your 3 fronts playing full range, you might like it.


Bruno
M80s/VP180/QS8s/EP600/AVR-890
------------------------------------
"The problem is choice..."
Re: VP180
JohnK #314635 07/14/10 01:55 PM
Joined: Oct 2006
Posts: 6,955
axiomite
Offline
axiomite
Joined: Oct 2006
Posts: 6,955
I agree with John.

You don't want your sub doing just the lowest frequencies that your mains can't do. A good sub is much more efficient and better designed to handle all the broader LFE range so you want to remove the task from your mains and let them concentrate on what they do best, some low bass likely but mostly all the midrange and highs.

It's the perfect blend you are looking for, not a hard cutoff. 80 Hz is kind of the defacto standard for people who don't want to tweak. That's where bass starts to become non-directional and also, as mentioned, a crossover is not necessarily a hard cutoff (snips off everything below or 80 or whatever N it's set for.) It is where it begins more of a rolling off of the lower frequencies to the sub. Some of the frequencies just below 80 or N will still get sent to your mains in order to keep things blending nicely but it will start to roll off fairly steeply after N.



With great power comes Awesome irresponsibility.
Re: VP180
Murph #314673 07/14/10 04:39 PM
Joined: Mar 2008
Posts: 89
D
old hand
Offline
old hand
D
Joined: Mar 2008
Posts: 89
Crossovers in AVRs are a gradual slope, typically 24dB per octave lowpass for the subwoofer and 12dB highpass for the rest of the speakers and the frequency chosen is the -3db point. So an 80Hz crossover will be 15dB down at 40Hz.

Re: VP180
Dundas #314884 07/15/10 03:59 PM
Joined: Dec 2005
Posts: 3,301
connoisseur
Offline
connoisseur
Joined: Dec 2005
Posts: 3,301
Come on guys 83 pages and not one full review of this new speaker, I'm slowly getting sucked in, but I'll have to build a rack and will probably wait until they hit the outlet. That's what I get for popping back onto the boards. crazy


A computer once beat me at chess, but it was no match for me at kick boxing.
Re: VP180
HomeDad #314885 07/15/10 04:07 PM
H
htnut
Unregistered
htnut
Unregistered
H
Any review will more than likely be posted in the VP180 First Impressions thread first.

Re: VP180
#314890 07/15/10 04:19 PM
Joined: Feb 2004
Posts: 1,863
connoisseur
Offline
connoisseur
Joined: Feb 2004
Posts: 1,863
that is because your looking in the wrong thread homedad

try this one....

http://www.axiomaudio.com/boards/ubbthreads.php?ubb=showflat&Number=312182&page=1

Re: VP180
dakkon #314891 07/15/10 04:29 PM
Joined: Dec 2005
Posts: 3,301
connoisseur
Offline
connoisseur
Joined: Dec 2005
Posts: 3,301
Thank You!


A computer once beat me at chess, but it was no match for me at kick boxing.
Re: VP180
HomeDad #315245 07/18/10 01:23 AM
Joined: Apr 2010
Posts: 96
H
old hand
Offline
old hand
H
Joined: Apr 2010
Posts: 96
I started a thread on some basic settings for the VP-180 matched with the M80's. What does everybody have their Db levels set?

When I ran Audyssey, it had my fronts set at -4.5 but I ended up changing them to 0.5 before I was okay with the sound. Actually I increased all the settings by at least 10db. The crossovers are set at 40 for the front three.

In comparison when I had a VP-150/M60 setup, My fronts were set at 60hz and the db levels were +3.5. Is that normal for it to be lower??

I feel like I am asking a ton of questions, but I just want to make sure I am setting everything up the best I can.

Thanks.

Re: VP180
HTGEEK #315248 07/18/10 01:40 AM
Joined: Mar 2008
Posts: 89
D
old hand
Offline
old hand
D
Joined: Mar 2008
Posts: 89
You should leave the speaker levels where the receiver set them if you want the calibration of your volume control to be correct and also if you are using Dynamic EQ.
Your new speakers are more efficient so it would make sense that the set up program would set them lower.

Page 83 of 90 1 2 81 82 83 84 85 89 90

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,939
Posts442,452
Members15,615
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 195 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4