Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
DIY AV rack
#395234 07/18/13 01:31 PM
Joined: Dec 2007
Posts: 257
local
OP Offline
local
Joined: Dec 2007
Posts: 257
Hello everyone. Curious has anyone here made their own AV rack? I am hoping to get my AV project going soon and this is one area I have not come up with a solution for.

I am not keen on the threaded rod type racks. I would prefer wood. For the back I am thinking 3 separate and stagged back panels to aid in hiding wiring.

If you made your own rack, tell us about it and include pics!


Mark
Pio 94,SB3,BD30,A35,Pio 48AV.Pronto 7000 controlling all. Getting ready for 22s, 150 & QS8s.
Re: DIY AV rack
mapatton #395241 07/18/13 03:56 PM
Joined: Sep 2004
Posts: 5,422
axiomite
Offline
axiomite
Joined: Sep 2004
Posts: 5,422
I am curious too. Those "Flexi-Racks" while somewhat easy to build and have the potential to look ok, actually aren't that cheap if done right.


Farewell - June 4, 2020
Re: DIY AV rack
mapatton #395244 07/18/13 04:23 PM
Joined: Oct 2009
Posts: 110
E
veteran
Offline
veteran
E
Joined: Oct 2009
Posts: 110
I'm thinking of welding something simple out of mild steel angle iron and 3/16 ths by 1 in strap (or smaller for bracing, if needed). Will posts pics if I do it.


Aunty Em
Tampa, FL
Re: DIY AV rack
mapatton #395245 07/18/13 04:45 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
I really envy people who have such skill that they can use "simple" and "welding" in the same sentence.

I'm interested in this topic, too. More woodworking porn.


bibere usque ad hilaritatem
Re: DIY AV rack
mapatton #395247 07/18/13 04:52 PM
Joined: Oct 2006
Posts: 6,955
axiomite
Offline
axiomite
Joined: Oct 2006
Posts: 6,955
A sturdy DIY rack can indeed be a surprise in cost once you get rolling at it.

If you don't need yours mobile, here is a bit of a MacGuiver job I came up with at my cousin's spot who wanted to hide his AV gear in a closet.

Instead of a $800 to $1000 metal rack, we ordered something similar to this 7' relay rack for less than 100 bucks at the time.

Because it's the front of a rack only, we found about $50 worth of brackets, bolts etc. at Home Depot that screwed into the front holes, even though that is not what they are really intended for.

For rear support, we cut 1"x1"x19" lengths of my scrap wood (free) and mounted them horizontally on the rear closet wall to match the height of the front brackets.

This gave us both front and rear supports to lay down some left over & some purchased, plywood cut into shelving to sit the gear on. We used more small bolts and screws to secure it all in place so the shelving did not move and, in turn, kept the front panel from tipping over.

I also (and this could be done a lot rougher) made a template for my router and made a long rounded and tapered cutout section in the back of each shelf so that cables could be run up and down the complete length of the cabinet. Finally I used my drill press to make a bunch more 3/4" holes in the shelving for added airflow.

We cut out sections on the top and bottom of his closet door and rigged up 4 inwward facing PC fans ($2.50 each at Princess Auto) at the bottom of the door and 4 outward facing ones at the top of the door. Just screwed them into the back of the door. We used an old PC power supply from my junk pile of PC parts to run them. Some splicing and plug robbing from other old parts was required. It's a cool basement and probably din't even need this, but we wanted to prove our beer inspired cooling concept.

I also cut and routed some nice trim to frame up where we cut holes in the door so it didn't look like such a hack job. He painted them to match the door.

Probably cost him about $250 in total (not counting his IR blaster) and cost me some old scrap wood that I normally save for bonfire season. We had lots of fun though and it's still working out nicely for him.

The only hack piece left....
He promised me he would move a power outlet (or two) into his closet to run everything but it's been a few years now and he still has 2 extension cords jammed under the door.

Last edited by Murph; 07/18/13 04:59 PM. Reason: probably unwanted details

With great power comes Awesome irresponsibility.
Re: DIY AV rack
mapatton #395250 07/18/13 05:15 PM
Joined: Aug 2009
Posts: 6,015
axiomite
Offline
axiomite
Joined: Aug 2009
Posts: 6,015
Mine cost me $7 at a garage sale. Some sturdy stackable plastic shelving.

Re: DIY AV rack
CatBrat #395251 07/18/13 05:34 PM
Joined: Dec 2007
Posts: 257
local
OP Offline
local
Joined: Dec 2007
Posts: 257
Well this rack is going to be in a room, and I desire to look similar to other pieces of furniture. Here is a crappy web pic of the coffee table.

My thought is to get some wood and cut out a number of shelves, then to use craft legs like these to separate the shelves.

Then stain to match the color.

For the back, it is hard to explain, but picture 2 L shaped pieces of wood that bracket each rear corner. I envision each being about 4" by 4". Then for the actual back, another piece of wood that spans the back sections of the L.

Last edited by mapatton; 07/18/13 05:37 PM.

Mark
Pio 94,SB3,BD30,A35,Pio 48AV.Pronto 7000 controlling all. Getting ready for 22s, 150 & QS8s.
Re: DIY AV rack
mapatton #395254 07/18/13 06:20 PM
Joined: Oct 2006
Posts: 283
B
local
Offline
local
B
Joined: Oct 2006
Posts: 283
You can see pictures of the floor-to-ceiling cabinet my wife and I built in the gallery section under: Bayne's Upgraded Home Theater.

We used oak-faced laminate and solid oak trim. It has movable shelves, and an opening in the rear to access all the cables. We left the shelves several inches shorter than the full depth of the cabinet so the cables and warm air could travel up to the ceiling.

Bottom line, spend some serious time designing your unit and thinking about cable management and air flow if it's enclosed. Take your time and don't skimp on the right tools for the job. Fortunatley places like Home Deport rent them for a decent price. Good luck, and enjoy!


"Not throwing my hands up or my dress above my ears don't mean I ain't awestruck." Al Swearengen
Re: DIY AV rack
mapatton #395257 07/18/13 07:31 PM
Joined: Jul 2009
Posts: 2,281
connoisseur
Offline
connoisseur
Joined: Jul 2009
Posts: 2,281
Im not sure if you do woodwork , but I built a mdf stand in a weekend with a router and skill saw then did a base/clear paint job. The shelves are adjustable.



DOG is GOD spelled backwards.
What others think of me is none of my business.
M80 V3 MY GLOSS Cherry
Re: DIY AV rack
mapatton #395258 07/18/13 07:41 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
That's really nice! Clever!


bibere usque ad hilaritatem
Page 1 of 3 1 2 3

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,939
Posts442,452
Members15,615
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 195 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4