Ok, I have the rotel seperates and I'm trying to figure out what others are using and comparing it to what I have. I have the rotel 1075 amp and 1068 pre-amp. I have my speakers all set to small and subwoofer on. The crossover settings are set at 60hz for fronts and center, 80hz for rears, and 60hz for sub. I'm guessing the sub only plays 60hz and below if I have the crossover set to max on the sub itself. By the way I have Axiom m60s, vp150 and I'm using my old polk rt800 that used to be my old mains as my current rears till I get Qs8 surrounds, and Infinity sub2 which isn't loud enough (some of you know about this). Anyway, what xover settings do you use and such for stereo playback or movie playback you find work best?

Mine looks like this:

All speakers set to small.
Crossover is 60 across the board.
Subwoofer crossover is bypassed.

Same setting regardless of what I'm listening to.

I run my 80s with a Rotel RC 1070 and a Rotel RB 1080 with an Outlaw Icbm inbetween them.I have the crossover set at 60hz,36 db octive.

i use the vp150 and cross over at 90-i set it that way after reading specs-sounds good to me?that is the correct setting,isnt it?ron

If it sounds good to you, that's all you care about.