If what you're saying is that the wiring is lower terminal to filter to upper terminal and upper terminal to subwoofer driver, then the upper terminal has to be the input.

Hi,

I'm new here and was looking for info on the Axiom AX 120 sub but find I may have something to contribute, too....I was reading the thread about the wiring of the AX120 and the stickers are still on my AX120....so here's the wiring setup (externally, anyway)

It's awkward to photograph it at present so I'll try to describe it...

With the AX120 standing with the speaker itself at the top and the connections below, the labels on the upper connections read Satellite Output (L&R)....

The lower speaker connections are labeled Main Input (L&R)...

N.B.: when facing the connectors the RIGHT side spring clips connect to the LEFT speakers and the LEFTside spring clips connect to he RIGHT speakers

Hope this helps somebody...

Regards,
Taras

Taras, welcome. Yes, the connections as you describe them on your AX120 appear to be the same as the ones on the different AX120 version which I linked above in post #374692. The outputs are the top terminals, and the right terminals are on the left(facing them)since that's the back of the sub.

James(DrBones)didn't check in again, so hopefully his AX120 didn't go up in smoke.

The only AX120 info that seems to be available is the specs in the chart also linked in the above post.