Hey guys, I thought I told ya, but another fine A+++customer service for Axiom. When I was calibrating my 3 subs over the last few weeks I noticed that the 600 level would not stay consitant.

If you recall I was having a hard time as I had to set the Gain to MIN with -12 on the Denon, which caused me to max out the gain on the 350's, something seemed wrong.

Then, all of a sudden my 600 would spike 40dB's from 70 to 100 on the SPL meter, I was like what the heck? I found out that if I took my index finger and applied pressure to the back amp plate anywhere, it would spike up. Or, if I pushed on any of the knobs the same thing would happen.

So I worked with JC and got a replacment amp sent to me. It is working like a charm.

I recall times in the past when watching movies that I was turning the gain up/down all the time, this explains whey the levels would not stick.

Anyway, the new amp does not have bypass, but 150 on the crossover. I'm wondering if this amp has the brickwall removed at 100hz.

M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85