The other thing that's kind of cool about the amp modules is the ease in switching form bridged to stereo mode. If it turns out that the M80 impedance is too low (it does seem to dip to 3 ohm) and the amp starts to overheat or cut out, I can always unbridge the amps by just changing a jumper and wiring the output from +V/+V on each amp, to +V/-V on each channel of the amp. I'd still have tons of power at 250W per channel, and now have 4 channels so I can also power the VP180 with it (and have 1 channel left over). It's a fallback position just in case.


LFR1100 Actives,QS10HPx2,QS8x2,EP800,M3x4,M3x2 (Wood),M5HPx2 (Wood),AxiomAir,ADA1500-8,ADA1500-7