Originally Posted By: CatBrat
What I can do is disconnect my two lower M22' mains. (I have 2 m22 mains. Upper and Lower.) Then connect the center channel output from the receiver to one of the Lower M22 mains. If I no longer hear the upper bass, then I will have proved my point. If I do hear the upper bass, I'll never mention it again. Fair?

Also, I'll try and test this using a frequency sweep that does one freq at a time and see if I can measure a difference. This might not tell me anything since there is a gap between each frequency.


Actually, all I have to do, is listen and measure with, and without, the VP160 being plugged into the mix. There is still an M80 plugged into the center channel.

Moving this discussion over to the Water Cooler, CatBrat thread here: http://www.axiomaudio.com/boards/ubbthreads.php?ubb=showflat&Number=390890&#Post390890