|#394688 - 06/30/13 04:13 AM Yamaha RX-V3800 AVR vs Outlaw 975/7125 separates?|
Loc: Calgary, Alberta
I'm currently using a Yamaha RX-V3800 receiver with the Axiom Epic 60-500 7.1 speakers (see sig).
The system is great and I have no complaints, but I have always wanted to try separates with my Axiom speakers, and I'm considering the Outlaw Audio 975/7125 combo.
Can someone please help me compare the amplification/power of my Yamaha receiver vs. the Outlaw separates?
On paper it looks like the Yamaha has more power (140W x 7), but I'm not sure if that is as clean, or as powerful in an all-in-one receiver?
I'm not comparing the features of the Yamaha receiver to the Outlaw processor, I'm only comparing the amp and overall sound quality.
I don't want to replace the Yamaha with separates if the sound is equal or lesser.
Here are the specifications for both.
Please forgive me, as I don't really know how to decipher all of these specifications.
Outlaw Audio 975 7.1 HDMI AV Surround Processor
Outlaw Audio 7125 7-Channel Amplifier
-Power Output: 7 x 125 watts RMS at 8 ohms, all channels -driven from 20 Hz to 20kHz with less than 0.05% THD 7 x 190 watts RMS at 4 ohms, all channels driven from 20 Hz to 20kHz with less than 0.05% THD
-Signal to Noise: 119dB "A" weighted
-Frequency Response: 20Hz. -20kHz. +/- 0.1 dB at rated output
-Total Harmonic Distortion: < 0.05% at rated output, all frequencies, 0.01% at 1 kHz.
-Intermodulation Distortion: < 0.05% at rated output.
-Power Bandwidth: 5 Hz - >125kHz +0/-3 dB
-Damping Factor: Greater than 400 from 10 Hz to 400 Hz
-Crosstalk: Greater than -90 dB from 20 Hz to 20Khz
-Gain: Voltage gain of 28 dB
-Slew Rate: 50v/uSec
-Input Impedance: Nominal 50k ohms
-Input Sensitivity: 1.00 Volts for Full Rated Output
Panasonic TC-P65V10 65" Plasma
Sony KDL-55XBR8 55" LED LCD
Axiom Epic 60 - 500 (7.1)