Hi aabouganem,
Booting with a USB stick installed is the same as doing a factory reset, which it seems like you already have done. After a Factory Reset your old network information will be gone. The flashing blue light means you are in Hotspot mode. You should be able to join the AxiomAir WiFi network on your computer. From there you can open a browser in either IE or Chrome and in the address bar enter 192.168.211.1 This will bring up the AxiomAir UI. Click the gear in the upper right, then Network. You should see your new home network part way down the page. Click the connect icon to the right of it, enter you network password, then click the connect icon to the right of your password. The light on the front of your AxiomAir should turn solid blue. You are now on your network. If you join your home network again on your computer, then click on Windows Explorer, then click on Network at the bottom left you should see your AxiomAir listed under Media Devices on the right. Double click on the AxiomAir and the UI will open. Now you can click the gear, then System, and then Check Updates at the bottom of the page. Give us a ring tomorrow if this doesn't work.
