Previous Thread
Next Thread
Print Thread
Rating: 4
Page 1 of 2 1 2
Using VP150 for Front Speakers?
#145971 08/22/06 04:50 PM
Joined: Aug 2006
Posts: 4
N
newbie
OP Offline
newbie
N
Joined: Aug 2006
Posts: 4
Is the VP150 suitable for use as both the center and as mounted L/R front speakers?

They would obviously be perfectly matched, the VP150 can handle more power than the W22s, they don't take up floor space like the M60s/M80s (a spouse requirement) and they can be aimed--unlike the W22s. On the flipside, the VP150 is obviously not designed for this purpose. It also operates at 6 ohms, whereas the W22s operate at 8 ohms--not sure if that makes a difference.

Re: Using VP150 for Front Speakers?
NotFadeAway #145972 08/22/06 06:25 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Would it work, yes. Would it be something I would try, probably not. There is a reason that mains/bookshelves have their drivers orientated vertically versus horizontally, like a center channel speaker. The tweeters are on top for a reason. Also, the enclosure is shaped differently. If you turned the VP150 on its side, you would have a tweeter on top and bottom. Also, the VP150 can't produce the same bass as a larger woofer.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Using VP150 for Front Speakers?
SirQuack #145973 08/22/06 06:41 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
Get M22's and Axiom Full Metal Brackets instead.

The VP150 is a great speaker, but is specifically designed to be oriented horizontally. I don't think three of them would image very well. Also, as Randy mentioned, it is a sealed speaker, and won't play as low as the M22.

Call Axiom.


bibere usque ad hilaritatem
Re: Using VP150 for Front Speakers?
tomtuttle #145974 08/22/06 06:43 PM
Joined: May 2003
Posts: 18,044
shareholder in the making
Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
Actually, Alan told me once that they sounded pretty good in vertical orientations as LR speakers. But they may also be much larger than you expect...


I am the Doctor, and THIS... is my SPOON!
Re: Using VP150 for Front Speakers?
SirQuack #145975 08/22/06 07:27 PM
Joined: Aug 2006
Posts: 4
N
newbie
OP Offline
newbie
N
Joined: Aug 2006
Posts: 4
Thanks, sirquack, et al. I've been reading your posts, so I'm glad that you responded. Do you have any concerns about the Architectural series or should I just get M60s/M80s and politely ignore spousal grumblings?

My home theater is medium to large-ish (18L x 14W x 8H), fully enclosed, with a 104" diagonal screen. My main concerns with the M22s are threefold:
1. May not be large enough for this room
2. Can't be aimed at the listening area
3. Will need to sit too high on the wall (tweeter at approximately 50-55")

Thoughts?

Re: Using VP150 for Front Speakers?
NotFadeAway #145976 08/22/06 09:28 PM
Joined: Jun 2005
Posts: 1,189
connoisseur
Offline
connoisseur
Joined: Jun 2005
Posts: 1,189
As John suggested, if you get the full metal bracket that Axiom sells you can aim them at the listening position. This would take care of concerns 2 & 3.

For that sized room the M60s would be nice, but it depends on your listening level preferences.


-Dave

M80s VP150 QS8s EP500s
ravenmanor.com/cinema/
Re: Using VP150 for Front Speakers?
NotFadeAway #145977 08/22/06 09:39 PM
Joined: Oct 2005
Posts: 558
aficionado
Offline
aficionado
Joined: Oct 2005
Posts: 558
Quote:

Thanks, sirquack, et al. I've been reading your posts, so I'm glad that you responded. Do you have any concerns about the Architectural series or should I just get M60s/M80s and politely ignore spousal grumblings?

My home theater is medium to large-ish (18L x 14W x 8H), fully enclosed, with a 104" diagonal screen. My main concerns with the M22s are threefold:
1. May not be large enough for this room
2. Can't be aimed at the listening area
3. Will need to sit too high on the wall (tweeter at approximately 50-55")

Thoughts?




My HT room is roughly the same size as yours. I have the 22s, and they sound great but in my opinion they are at the edge of their effectiveness in that room. Not close enough that I'm desperate to switch to 60s, but on the edge. I would suggest the 60s. Also the VP150, not being ported, probably would not be the best for music playback.


"That's some catch, that Catch-22." "It's the best there is." M22ti VP150 EP350 QS8 M3Ti
Re: Using VP150 for Front Speakers?
dllewel #145978 08/22/06 11:38 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
Ummm, Dave, John's not here, man.

I always aspire to ignore spousal grumblings. Just get the 60's. You know you want them. Then, you can learn the secret handshake and become part of the posse and everything.

j/k. It really does depend upon how loud you want it. But anecdotal evidence suggests that you'll want it louder AFTER your Axioms than you did before.


bibere usque ad hilaritatem
Re: Using VP150 for Front Speakers?
tomtuttle #145979 08/22/06 11:56 PM
Joined: Dec 2005
Posts: 3,301
connoisseur
Offline
connoisseur
Joined: Dec 2005
Posts: 3,301
LOL, Well said as usual on all three comments


A computer once beat me at chess, but it was no match for me at kick boxing.
Re: Using VP150 for Front Speakers?
tomtuttle #145980 08/22/06 11:56 PM
Joined: Aug 2006
Posts: 4
N
newbie
OP Offline
newbie
N
Joined: Aug 2006
Posts: 4
Thanks everyone. Now how do I block out the grumblings without otherwise compromising the sound?

Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,945
Posts442,473
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
1 members (Kodiak), 532 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4