Previous Thread
Next Thread
Print Thread
Rate Thread
Adding rears to an unconventional setep.
#167300 05/03/07 08:09 AM
Joined: Mar 2007
Posts: 16
H
Hanzo Offline OP
frequent flier
OP Offline
frequent flier
H
Joined: Mar 2007
Posts: 16
I use a pair of M3ti's as main L/R speakers and wanted to add a couple rears to get quad surround. My setup is a bit unconventional.

I made a similar thread a couple months back but I wouldn't be able to take full advantage of larger speakers and a subwoofer at the moment since I'm limited to the amount of noise I can produce and don't have the $ to soundproof everything

My setup is a bit unconventional because I use 2 different chairs at two different distances depending on which task I'm performing with my HTPC. I could be sitting close to the speakers at my desk playing games, listening to music or working (using a 1920x1200 res huge LCD) or I could be sitting in a lounge chair approx 5-6 feet away while watching a movie (the speakers are about 4.5 feet apart, big desk). So I am unsure of how I would setup the rear speakers. I find the M3ti's to work quite well in both situations while sitting on my desk and while sitting a distance away in the lounge chair. The rears would have to be quite a distance back from the desk in order for them to be behind me while I'm sitting in my lounge chair, maybe 9+ feet or so. I wanted to know how poorly this would sound at this distance since the M3's will be much closer to me most of the time while I'm sitting at my desk. Maybe someone could offer suggestions of how I could arrange them to work OK in both situations (I know this all probably sounds awful to an audiophile purist)

Also if anyone could suggest some inexpensive rears I would be most appreciative. The QS-4 are a bit more than I would like to spend at the moment and probably overkill for some m3's so I'm thinking about just adding another two M3's to match the ones I have now.

If anyone has any suggestions I would appreciate any response. Take care.

Last edited by Hanzo; 05/03/07 08:11 AM.
Re: Adding rears to an unconventional setep.
Hanzo #167301 05/03/07 08:47 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
2 more M3's would be the best in your situation, as you say the QS's cost a little too much. I would think you could then do some setup configuring in the HTPC to give you the best sound as needed.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Adding rears to an unconventional setep.
Hanzo #167302 05/03/07 10:00 AM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
The rears should not sound poor being that far away provided you have controls on your HTPC to adjust the speaker distance (ie. time delay) and gain.

Re: Adding rears to an unconventional setep.
Mojo #167303 05/03/07 03:44 PM
Joined: Mar 2003
Posts: 320
devotee
Offline
devotee
Joined: Mar 2003
Posts: 320
Quote:

The rears should not sound poor being that far away provided you have controls on your HTPC to adjust the speaker distance (ie. time delay) and gain.




That was my thought as well. If you can have 2 settings, set one for near (ie when you're working) where you bump up the volume in the rears, and one for far where you would bring down the rears.

Rich


Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,943
Posts442,465
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 236 guests, and 6 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4