Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Cable Modem configuration question
#258445 04/27/09 05:53 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
OP Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
I am replacing DSL with Comcast cable modem. Installation is set for tomorrow.

Currently, the DSL modem (Cisco 678) sits between my router (D-Link WRT54G) and the world. I want to simply replace that appliance with the Motorola SB5101 cable modem.

The SB5101 instructions seem to indicate that it requires a dedicated USB connection. Because of where all this stuff is located, I don't really have any interest in having it hooked up to a computer via USB all the time.

I kind of figured that the USB connection was only for setup (like the serial connection on the cisco) and that - after you've got everything "done" - you can disconnect the USB and just enjoy your bandwidth.

I don't see how I'd access the cable modem when my router is already 168.1.0.0 (or whatever) on my network.

So, I guess my question for those of you with cable modem access is - are you required to have a perpetual USB connection to the cable modem?

The answer could dramatically affect "where" I have the copper installed.

Thanks for your help.


bibere usque ad hilaritatem
Re: Cable Modem configuration question
tomtuttle #258456 04/27/09 06:31 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
Nope. Mines a Moterolla SB5100. I see there is a usb port on the back, but I've never used it for anything. Don't know what its for.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Cable Modem configuration question
tomtuttle #258458 04/27/09 06:33 PM
Joined: Oct 2006
Posts: 6,955
axiomite
Offline
axiomite
Joined: Oct 2006
Posts: 6,955
Our service is DSL but a quick peek at the FAQ for this modem says you can use USB or up to 100MB Ethernet. You should be fine plugging it by Ethernet directly into your router.

I didn't dig deep enough to definitely answer your second question but it should not be a problem. It may pass on a 'real' Internet address that your router will 'route' to your local 168 network. If not you may have to tweak a bit but the setup looks like it will walk you through this step.

Last edited by Murph; 04/27/09 06:39 PM.

With great power comes Awesome irresponsibility.
Re: Cable Modem configuration question
fredk #258459 04/27/09 06:34 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
OP Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
Cool, Fred, thanks.

Do you have the Ethernet cable from the SB5100 attached to a router, then?


bibere usque ad hilaritatem
Re: Cable Modem configuration question
tomtuttle #258461 04/27/09 06:40 PM
Joined: Oct 2006
Posts: 6,955
axiomite
Offline
axiomite
Joined: Oct 2006
Posts: 6,955
Andrew also says, "your Welcome"....

heh heh, Kidding!


With great power comes Awesome irresponsibility.
Re: Cable Modem configuration question
Murph #258466 04/27/09 06:55 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
OP Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
Yes, Andrew, thank you as well! Apparently, you and I hit "send" at about the same time; you message was not yet visible to me when I replied to Fred's post.

So, "Thank's" ;\)


bibere usque ad hilaritatem
Re: Cable Modem configuration question
tomtuttle #258469 04/27/09 07:02 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
I'm running ethernet to a linix firewall box. Its not a real network yet, but its the same thing.

When I originally got this, the cable company set it up. I remember them asking how I wanted the box hooked up to my computer. I just chose ethernet. Since the only other connection on the back of the modem is USB, that must have been the other choice.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Cable Modem configuration question
fredk #258474 04/27/09 08:02 PM
Joined: Oct 2003
Posts: 1,349
connoisseur
Offline
connoisseur
Joined: Oct 2003
Posts: 1,349
Here's your new modem.

It has both a USB port and an ethernet jack. This is pretty common on both DSL and Cable modems. You'll use the ethernet port to connect to your DLink router, just as you do now with the DSL. Your DLink should continue doing exactly what it has been doing. It shouldn't need to change, unless it's some bizarre case of being incompatible with the cable modem.

I'm not sure of the specifics of your situation, but you may have to adjust some of the settings in the DLink so that it will be able to 'see' the Internet. The last time I had a cable modem, if I remember correctly, my router was set up in a more-or-less 'Automatic acquire' mode for the WAN connection (router's connection to the Internet). It grabbed the DNS & gateway info automatically. With my DSL modem, this had to be changed to a 'PPPOE' connection where the router supplies a Username/password to the modem for the connection to my DSL provider's (Verizon) network.

The tech guy doing the install ought to be able to help you with this setup.

The UBS ports on the back of these things are for networking without a network. For situations where a customer doesn't have a router. You can plug these modems directly into a PC/Mac with a USB cable and it'll provide an internet connection. With a router, you wouldn't be using this feature. But with some modems (my DSL modem for instance), it's also the only way to directly configure them and/or do firmware updates.

When I had a cable modem, I never had to do anything with the cable modem itself other than plug it in; AC, Cable, ethernet to router. All of the settings that mattered were done to my router's config settings.

Good luck!

Last edited by PeterChenoweth; 04/27/09 08:13 PM.

M80v2 | VP150v2 | QS8v2
SVS Pci+ 20-39
Emotiva UMC-1 & LPA-1
M22ti + T-Amp, in the Office
Re: Cable Modem configuration question
PeterChenoweth #258479 04/27/09 08:29 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
OP Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
Whew! Thanks so much, gentlemen. I'm going with Plan A until further notice.


bibere usque ad hilaritatem
Re: Cable Modem configuration question
tomtuttle #258503 04/28/09 12:45 AM
Joined: Dec 2005
Posts: 1,467
connoisseur
Offline
connoisseur
Joined: Dec 2005
Posts: 1,467
Comcast is evil.



M22s|VP100|QS4s|HSU STF2
Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 558 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4