Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Can't get my W22's to "lock" into the mtg bracket
#292138 02/13/10 10:08 PM
Joined: Jan 2010
Posts: 578
G
Glitchy Offline OP
aficionado
OP Offline
aficionado
G
Joined: Jan 2010
Posts: 578
Can't get my W22's to "lock" into the mtg bracket

Any advise?

The slot is on the top as shown. The brackets are level. My wires are coming from below, if they were slipping behind the w22s as I slide them in would that hold them out enough that they wouldn't "lock".

Thanks

Jeff


Fronts/Wides:M22s in/on
Center:VP150/VP100 in/on
Hghts,SS,SR:QS8s
Sub:EP500
AVR:Onkyo 3008
Re: Can't get my W22's to "lock" into the mtg bracket
Glitchy #292139 02/13/10 10:37 PM
Joined: Sep 2008
Posts: 313
devotee
Offline
devotee
Joined: Sep 2008
Posts: 313
The w22s don't actually lock onto the bracket. They just slide in. Gravity does the rest.


PeachTree 65se, PeachTree D5 and SVS SB1000 - Stereo
M80s, M22s, SVS PB3000


Re: Can't get my W22's to "lock" into the mtg bracket
Listener #292144 02/14/10 01:06 AM
Joined: Jan 2010
Posts: 578
G
Glitchy Offline OP
aficionado
OP Offline
aficionado
G
Joined: Jan 2010
Posts: 578
 Originally Posted By: Listener
The w22s don't actually lock onto the bracket. They just slide in. Gravity does the rest.


Thanks


Fronts/Wides:M22s in/on
Center:VP150/VP100 in/on
Hghts,SS,SR:QS8s
Sub:EP500
AVR:Onkyo 3008
Re: Can't get my W22's to "lock" into the mtg bracket
Listener #292145 02/14/10 01:08 AM
Joined: Jan 2010
Posts: 578
G
Glitchy Offline OP
aficionado
OP Offline
aficionado
G
Joined: Jan 2010
Posts: 578
 Originally Posted By: Listener
The w22s don't actually lock onto the bracket. They just slide in. Gravity does the rest.


Thanks


Fronts/Wides:M22s in/on
Center:VP150/VP100 in/on
Hghts,SS,SR:QS8s
Sub:EP500
AVR:Onkyo 3008
Re: Can't get my W22's to "lock" into the mtg bracket
Listener #292169 02/14/10 05:10 PM
Joined: Jan 2010
Posts: 578
G
Glitchy Offline OP
aficionado
OP Offline
aficionado
G
Joined: Jan 2010
Posts: 578
 Originally Posted By: Listener
The w22s don't actually lock onto the bracket. They just slide in. Gravity does the rest.


So just the W150 "locks" snaps in? and the W22s just "set in"?

Thanks again

Jeff


Last edited by wordgasm; 02/14/10 05:30 PM.

Fronts/Wides:M22s in/on
Center:VP150/VP100 in/on
Hghts,SS,SR:QS8s
Sub:EP500
AVR:Onkyo 3008
Re: Can't get my W22's to "lock" into the mtg bracket
Glitchy #292171 02/14/10 05:11 PM
Joined: May 2003
Posts: 18,044
shareholder in the making
Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
I'd say call Axiom on this one...


I am the Doctor, and THIS... is my SPOON!
Re: Can't get my W22's to "lock" into the mtg bracket
Ken.C #292172 02/14/10 05:13 PM
Joined: Jan 2010
Posts: 578
G
Glitchy Offline OP
aficionado
OP Offline
aficionado
G
Joined: Jan 2010
Posts: 578
 Originally Posted By: kcarlile
I'd say call Axiom on this one...


Thanks, will do!

Jeff


Fronts/Wides:M22s in/on
Center:VP150/VP100 in/on
Hghts,SS,SR:QS8s
Sub:EP500
AVR:Onkyo 3008
Re: Can't get my W22's to "lock" into the mtg bracket
Glitchy #292211 02/14/10 09:20 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
As far as I know they use the same bracket.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Can't get my W22's to "lock" into the mtg bracket
SirQuack #292214 02/14/10 09:28 PM
Joined: Jan 2010
Posts: 110
A
veteran
Offline
veteran
A
Joined: Jan 2010
Posts: 110
I messed with that for awhile. Push w22 "in" first, then push straight "down". The downward travel is about 3/8 of an inch.

The down force needed is quite a bit



Last edited by axiomoholic; 02/14/10 09:29 PM.
Re: Can't get my W22's to "lock" into the mtg bracket
axiomoholic #292215 02/14/10 09:33 PM
Joined: Jan 2010
Posts: 578
G
Glitchy Offline OP
aficionado
OP Offline
aficionado
G
Joined: Jan 2010
Posts: 578
 Originally Posted By: axiomoholic
I messed with that for awhile. Push w22 "in" first, then push straight "down". The downward travel is about 3/8 of an inch.

The down force needed is quite a bit



I'll give it a try... felt like I was already usin' quite a bit of force but I'll go "lean on them a bit"

The W150 & W22 wall frames are the same design concept, but "algin slots" are different and the size is a wee bit different.

Sidenote: This is going to be addicting, less than 24 hrs up and running with the Axioms and I just ordered a W100 for Dual Centers, above and below display.

Thanks

Jeff

Last edited by wordgasm; 02/14/10 09:35 PM.

Fronts/Wides:M22s in/on
Center:VP150/VP100 in/on
Hghts,SS,SR:QS8s
Sub:EP500
AVR:Onkyo 3008
Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 386 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4