Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
Re: QS8 Placement? Backwall or sidewall?
Adrian #299153 03/29/10 03:38 AM
Joined: Mar 2010
Posts: 12
frequent flier
Offline
frequent flier
Joined: Mar 2010
Posts: 12
Thanks. That would put my surrounds about 1 1/2 feet away from the ceiling. I'm guessing thats enough clearance for the top woofer.

Here's another question regarding surrounds, would you use QS8 for Front Height L/R for a Pro Logic IIz? or would you use an M22?

Does anyone use this format (Pro Logic IIz) and is there any truth to how good this sounds?


Axiom Audio M60V2, VP100V2, QS4, Standard Cable
Re: QS8 Placement? Backwall or sidewall?
Lobo #299155 03/29/10 03:46 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Since the derived height material is ambient and diffused in nature, speakers with very wide dispersion should be more appropriate. QS4s should be plenty for that application.


-----------------------------------

Enjoy the music, not the equipment.


Re: QS8 Placement? Backwall or sidewall?
JohnK #299162 03/29/10 06:22 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Going by Grunt's review I would suggest using QS8s or 4's.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: QS8 Placement? Backwall or sidewall?
JohnK #299232 03/29/10 07:40 PM
Joined: May 2008
Posts: 20
S
hobbyist
OP Offline
hobbyist
S
Joined: May 2008
Posts: 20
My previous set up had my QS8's on the back wall. I didn't like the fact that my couch was up against this wall also. Now my new setup allows me to have my couch centered in the room with the back walls about 7 feet away. My sidewalls will be approx. 5 feet away on each side of the listening area. Placing my QS8's on the side walls will allow the speaker to be approx 4 feet back from my listening area. Thus the delimma of sidewall vs. backwall placement. I'm right in the middle of that transition zone. I will probabbly try the sidewalls in this setup with speaker height at approx. 7 feet. Seems that the sidewall will be more forgiving than the back walls. Thanks for your reply.

Re: QS8 Placement? Backwall or sidewall?
stanmanh #299234 03/29/10 07:52 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Sounds like an ideal setting for 7 channels with QS8 sides and QS8 or M2 rear channels.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: QS8 Placement? Backwall or sidewall?
jakewash #299275 03/30/10 01:07 AM
Joined: Jan 2009
Posts: 349
D
devotee
Offline
devotee
D
Joined: Jan 2009
Posts: 349
This is a long read (sorry if you've seen this before) but this might help in regards to speaker placement. It just about covers everything about 5.1 mixing...I found it very interesting...

Directly from the recording sound engineers...
Producers and Engineers

Dana


M80's, QS8's, M22's, CHT SHO-10, Dual CHT SS-18.1's, Onkyo NR3008, Mitsubishi WD-73740
Re: QS8 Placement? Backwall or sidewall?
Dduval #299302 03/30/10 03:45 AM
Joined: Mar 2010
Posts: 12
frequent flier
Offline
frequent flier
Joined: Mar 2010
Posts: 12
Thanks for that document... very interesting indeed.

Is it just me or did this document go against everything that we just discussed and also what is recommended by Dolby itself.

This document recommends to position rear surround speaker behind the sweet spot at an angle between 110 and 150 and not at direct 90. The height recommendations is at ear level not any "x" feet above.

"Often, the rear speakers are positioned on the side of the listening area instead of behind it. If they are placed to the rear, they are often hidden behind furniture (thus producing a muffled sound) or mounted up on the wall behind the listening position, firing well above the listener's head. As a result, arrival times can vary so widely that there may be no "sweet spot" whatsoever where the listener can actually enjoy a correctly balanced blend of the speaker channels without phase smearing."

I guess it makes sense if the person recording follows these rules then it should follow in your HT or am I wrong in this assumption? or does this come down to there really are no clear rules / specifications and it's "what personally works best for you" kind of world?


Axiom Audio M60V2, VP100V2, QS4, Standard Cable
Re: QS8 Placement? Backwall or sidewall?
Lobo #299303 03/30/10 03:47 AM
Joined: Jan 2009
Posts: 349
D
devotee
Offline
devotee
D
Joined: Jan 2009
Posts: 349
I personally would follow the engineers advice...that's just me thou.

Dana


M80's, QS8's, M22's, CHT SHO-10, Dual CHT SS-18.1's, Onkyo NR3008, Mitsubishi WD-73740
Re: QS8 Placement? Backwall or sidewall?
Dduval #299313 03/30/10 04:30 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Sounds to me like that article is dealing more with multichannel music reproduction than for HT going by this statement:

"It is worth noting that the ITU (International Telecommunications Union) has recommended that the rear speakers be positioned more to the side of the listener, angled between 100° and 120°. (See section 1.) This recommendation, which was originally developed for television broadcast and not for music,
represents a compromise between envelopment, which is strongest at 90°, and rear phantom imaging, which improves as the rear speakers are moved further back and are angled in more steeply. Although this practice has been adopted by many surround professionals in the film and broadcast industries, it may not
be suitable for music applications where the rear speakers are used to carry vital musical information and not just ambience or effects. Speaker placement, therefore, need not be restricted to the ITU recommendation alone: at the engineer’s discretion, more extreme rear speaker anglings (at up to 150°) are acceptable, depending upon the program content being mixed."


It also states that in the home market speaker placements can be all over the place and this article is just for the use in the mixing of sound at the professional level to provide something of a standard. I also noted it is now a 6 yr old document. I wonder if anything has changed.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: QS8 Placement? Backwall or sidewall?
Dduval #299358 03/30/10 02:28 PM
Joined: Jan 2002
Posts: 3,270
connoisseur
Offline
connoisseur
Joined: Jan 2002
Posts: 3,270
Hi,

There is a lot of wrong-headed information in this article. As Jakewash points out, the article deals largely with mixing for multi-channel music recordings.

I have attended Hollywood mixing theater sessions for surround-sound films (the Alfred Hitchcock mixing theater in L.A.) and the surround speakers comprise four speakers on each side wall with two or more on the rear wall.

Many of the names on the list of recording engineers on this document are well known music engineers, not mixing engineers for movie soundtracks. The document is quite dated ("the trend in surround speakers is toward direct-radiating. ."); in fact, the trend in surround speaker design is towards bipole or dipole designs or switchable models.

Originally, when SACD and DVD-Audio multi-channel music formats were introduced, music engineers were at odds with Dolby Labs and THX in suggested surround speaker placement. As the document indicates, they preferred direct-radiating surrounds placed much more to the rear so they would image a sweet spot in the center of the room. The problem with this arrangement is that if you moved your seat slightly rearward the imaging collapsed to the rear speakers. Plus this arrangement only provided a sweet spot position for one listener. Anyone else in the received a soundstage skewed to one side or the other, the front or the rear.

As multi-polar, dipole and bipole speakers were used for music playback arranged in the Dolby array, it became clear that a diffuse and enveloping "wash" of audio was preferred by most listeners.

I also attended several New York sessions hosted by some of the recording engineers named in the document. One of the more bizarre demos was of a multi-channel music recording that placed Neil Young in the rear channels, which was totally unrealistic and very peculiar.

By far the best illusion for home listening of movie soundtracks or multi-channel music is achieved with multi-polar surrounds placed in the Dolby configuration. With well-designed surrounds like the QS8s, ambient envelopment is achieved with no loss of imaging specificity for sounds hard-mixed to a specific side or rear locaton.

Regards,
Alan


Alan Lofft,
Axiom Resident Expert (Retired)
Page 2 of 3 1 2 3

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 565 guests, and 1 robot.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4