Previous Thread
Next Thread
Print Thread
Rate Thread
Equipment Cabinet
#305285 05/07/10 06:24 PM
Joined: May 2006
Posts: 9
D
David_G Offline OP
regular
OP Offline
regular
D
Joined: May 2006
Posts: 9
Looking for a cabinet for all my gear. Something along the lines of the StudioTech U-22T. The trouble is, the VP150 is 27.5" wide and there is very little I've found that has a center drawer/cabinet that wide.

Any one have a model they like?

Re: Equipment Cabinet
David_G #305286 05/07/10 06:33 PM
Joined: May 2003
Posts: 2,185
connoisseur
Offline
connoisseur
Joined: May 2003
Posts: 2,185
Pricey and older style but I ended up w/ a Salamander Synergy because of the same problem. You can also get a riser to put a display above the VP150.

Re: Equipment Cabinet
oldskoolboarder #305288 05/07/10 06:39 PM
Joined: Jun 2003
Posts: 8,488
T
axiomite
Offline
axiomite
T
Joined: Jun 2003
Posts: 8,488
Or just get a VP100. \:\)


bibere usque ad hilaritatem
Re: Equipment Cabinet
oldskoolboarder #305289 05/07/10 06:43 PM
Joined: May 2006
Posts: 9
D
David_G Offline OP
regular
OP Offline
regular
D
Joined: May 2006
Posts: 9
Thanks. I found this unit from BDI.
http://www.bdiusa.com/theater/avion_2_8929.shtml

It's rough going as I have the VP150 to fit in a center slot and the Yamaha RX-Z11 to fit in one side.

The Z11 is 17.125" x 8.25" x 19.675” (W x H x D).
The VP150 is 27.5" x 7.5" x 7.5" (W x H x D).

Re: Equipment Cabinet
David_G #305290 05/07/10 06:46 PM
Joined: May 2006
Posts: 9
D
David_G Offline OP
regular
OP Offline
regular
D
Joined: May 2006
Posts: 9
How did you pull off the 27.5" center? The Synergy says each hole is only 19.75" wide.

Re: Equipment Cabinet
David_G #305292 05/07/10 06:47 PM
Joined: May 2006
Posts: 9
D
David_G Offline OP
regular
OP Offline
regular
D
Joined: May 2006
Posts: 9
Tom, how could I downgrade?!? Plus the VP150 is paid for!

Re: Equipment Cabinet
David_G #305372 05/08/10 12:46 AM
Joined: Apr 2010
Posts: 92
N
old hand
Offline
old hand
N
Joined: Apr 2010
Posts: 92
This was a problem for me as well, i looked for a couple weeks before finding a cheaper one than anticipating. I had a budget of up to about 800 or so and only spent 400. It has a floating mount so i was able to raise it above the center and the shelves had enough clearance for air to move around the receiver. if your curious it was from 399sofastore.com and don't knock the name cause they were the only ones in Nashville who had what i needed.


edit for link

http://www.399sofastore.com/haviencrbysa.html

Last edited by Nashvegas Rocks; 05/08/10 12:47 AM.

M22's
VP100
QS4's
SVS PB12-NSD
Denon 2310CI
Panasonic P58S2
Panasonic P50S2
Re: Equipment Cabinet
Nashvegas Rocks #305431 05/08/10 07:16 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
I have seen a few stands that the VP150 will fit into while looking through here I just can't remember which models.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Equipment Cabinet
jakewash #305964 05/11/10 01:13 PM
Joined: Feb 2007
Posts: 427
devotee
Offline
devotee
Joined: Feb 2007
Posts: 427
If you are looking for a cabinet that will fit the vp150, this is the one I have. It fits the 150 perfectly. You can also click the Lineart button near the top right to see the dimensions of the insides.

http://www.techcraft.net/4105/detail.asp?product_id=1636&category_id=284

Price was $500 and it is well made.

Last edited by DanielBMe; 05/11/10 01:15 PM.

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 386 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4