VP 150 -no sound
|
Joined: May 2010
Posts: 8
regular
|
OP
regular
Joined: May 2010
Posts: 8 |
I have a rx-v 3900 yamaha receiver and i run it with my axiom vs-150,m-60,qs 8,and EP-500.I run the receiver in 8 omhs.
I first had a problem with my vs 150...there was no sound and when i contacted axiom they said that the drivers have failed and sent me a replacement speaker.Again after running for 10days the center speakers failed and again i found that all the 3 mid range drivers are blown.Is there are problem in my setup.i get no sound from my qs 8 as well on one side,,,i feel that the drivers in that too has failed.and today my sub also stopped working...no sound from the sub...i keep blowing all the drivers.Is it the problem that my speakers dont match the receiver ? Has anyone fased similier problems? Ashok India
|
|
|
Re: VP 150 -no sound
|
Joined: Aug 2009
Posts: 6,015
axiomite
|
axiomite
Joined: Aug 2009
Posts: 6,015 |
|
|
|
Re: VP 150 -no sound
|
Joined: Sep 2008
Posts: 4,116
connoisseur
|
connoisseur
Joined: Sep 2008
Posts: 4,116 |
The rx-v 3900 yamaha receiver should have no issues driving that system. It is perfectly compatible. You are also doing the correct thing in setting the yamaha to 8 ohms instead of the 4 ohm option.
The possible causes I can think of are a defective receiver, powering the receiver beyond its capabilities which is inducing clipping and damaging the speakers or maybe a underlying problem with electrical storms which damaged your receiver and or speakers (do you get these in India and if so have you had them lately?). Do you also like to listen to movies/music at what you consider very loud playback levels?
Very strange problem indeed. You might see 1 blown driver but you are blowing multiple drivers in multiple speakers. Are the tweeters functional? This is a rare case.
I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.
-Max Payne
|
|
|
Re: VP 150 -no sound
|
Joined: Jan 2004
Posts: 13,840 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,840 Likes: 13 |
there is no problems with the speakers, if this is a true story, you must have issues in your receiver or some other power issue. 1 defective vp150 is possible, but 2 is hardly likely.
sorry your having issues.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Re: VP 150 -no sound
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
The fact that the system works for awhile and then failures start certainly suggests some sort of power issue either through the receiver or the receiver itself, ie clipping. I would be trying a good surge suppressor like Panamax, Belkin or similar for starters. Also if possible try running the system with a known good avr perhaps borrowed from a friend.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: VP 150 -no sound
|
Joined: Jul 2004
Posts: 4,444 Likes: 16
connoisseur
|
connoisseur
Joined: Jul 2004
Posts: 4,444 Likes: 16 |
Are you in India?
Is so, what's the voltage / hertz in India? Is the 3900 compatable?
|
|
|
Re: VP 150 -no sound
|
Joined: May 2010
Posts: 8
regular
|
OP
regular
Joined: May 2010
Posts: 8 |
hi michael, in india the power supply is 220v and my amp is 220v...Also i would like to mention that i am using vp 100 now without any problem on the same amp regards ashok
|
|
|
Re: VP 150 -no sound
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
Can you try the VP 100 on all the different channel the amp has just in case the 3900 has some faulty amp sections, although this could render the VP100 inoperable as well.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Forums16
Topics24,943
Posts442,465
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
236
guests, and
6
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|