Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Opinions on using VP100 as stereo speakers
#309444 06/05/10 05:46 AM
Joined: Jun 2010
Posts: 33
E
enthusiast
OP Offline
enthusiast
E
Joined: Jun 2010
Posts: 33
Hey guys,

I was wondering if any of you tried and give your opinion on using the vp100 as right and left stereo speakers with a EP500 subwoofer? The reason why I am asking is because the symmetrical or horizontal nature of the speaker design makes it much easier to use in my living room where having horizontal speaker placement for me is difficult. Also the speakers are not bass reflex so there is less concern for me putting them close to a wall and blocking a port.

What are your thoughts?

Re: Opinions on using VP100 as stereo speakers
elsewhere #309446 06/05/10 06:29 AM
Joined: Dec 2006
Posts: 3,569
connoisseur
Offline
connoisseur
Joined: Dec 2006
Posts: 3,569
IMO it depends on what you plan to use them for. I wouldn’t do that if critical listening to music is big on your list. The reason most speakers are vertical is because that make for a better horizontal dispersion of the sound coming from them. Which in turn helps to produce a better soundstage.

OTOH if movies and TV are most of your listening then they might work out ok. I personally like the wider dispersion of sound for watching on screen action because it better created a theater like wall of sound making it harder to pinpoint the location the sound is coming from so that it seems to blend better with the on screen action.

Do you plan to grow this into a 5.1 or 7.1 or ?.1 (who knows where it’s going next), or is this going to strictly be for stereo?

Depending on your constraints I’d be more inclined to go with bookshelf speakers and a sub. If you absolutely don’t want a bass reflex speaker then I would find one that either isn’t ported or front ported if you haven’t tried that yet.

Someone did post pictures of a setup with 3 VP150 across the front L/C/R but I have no idea how it sounded with music and am inclined to think it doesn’t do well at reproducing a realistic soundstage.

Also have you considered in or on wall speakers. Those shouldn’t be ported. I’m also guessing you meant to say “having vertical speaker placement for me is difficult” or you wouldn’t be looking at going with the VP100s


Cheers,
Dean


3M80 2M22 6QS8 2M2 1EP500 Sony BDP-S590 Panny-7000 Onkyo-3007 Carada-134 Xbox Buttkicker AS-EQ1
Re: Opinions on using VP100 as stereo speakers
elsewhere #309449 06/05/10 07:56 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
EW, welcome. It's unclear if you want to place the speakers horizontally or vertically, since you say that horizontal "is difficult". As Dean pointed out, vertical is generally better. As far as back ports, as long as they're at least a few inches from the wall and have "breathing room", they're okay.


-----------------------------------

Enjoy the music, not the equipment.


Re: Opinions on using VP100 as stereo speakers
JohnK #309464 06/05/10 02:37 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
Can it be done yes, but if your talking about placing a horizontal designed center speaker on end, in a vertical orientation, I don't think the soundstage would be as good as using a speaker designed to be vertical. What is wrong with going with one of the bookshelf speakers or onwall/inwall designs, they don't require that much space.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Opinions on using VP100 as stereo speakers
SirQuack #309478 06/05/10 05:02 PM
Joined: Sep 2008
Posts: 4,116
connoisseur
Offline
connoisseur
Joined: Sep 2008
Posts: 4,116
Setting up 3 VP100 vertically or 2 VP100 vertically and the center horizonally would definitely work. I would cross them over to the sub higher than the suggested 80hz since they will not have much bass extension. Start with something like 100hz and keep the 500 up front with your mains. Even better would be something like dual EP350's matched up with the VP100's - one sub next to each L & R speaker would work wonderfully with a higher crossover point.


I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.

-Max Payne
Re: Opinions on using VP100 as stereo speakers
BlueJays1 #309479 06/05/10 05:09 PM
Joined: May 2003
Posts: 18,044
shareholder in the making
Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
M22s perform very well near a wall--pmbuko used his on full metal brackets and reported better bass extension than sitting on a shelf farther from the wall.

I don't really see the point of using VP100s vertically (on end)--their bass extension will not be as good as the M22s, the cabinets are larger, and they're not designed to be used that way.


I am the Doctor, and THIS... is my SPOON!
Re: Opinions on using VP100 as stereo speakers
Ken.C #309482 06/05/10 05:14 PM
Joined: Sep 2008
Posts: 4,116
connoisseur
Offline
connoisseur
Joined: Sep 2008
Posts: 4,116
Bass extension really doesn't matter if you are using a subwoofer like he will be doing. You can compensate with a higher crossover point to the sub and carefully place the subwoofers as close to your mains as possible to avoid/minimize any localization. My advice would be to use 2 subwoofers (EP350) over a single EP500 for this purpose.


I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.

-Max Payne
Re: Opinions on using VP100 as stereo speakers
BlueJays1 #309510 06/05/10 08:06 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
There has been one posting about a set LCR VP150's set up across the front in a large open space, where are those pics?. I would think 3 VP100s across the front would work just as well and has been mentioned ensure the sub is near the front and set the crossover around 100hz.

But if you have enough room to run, say 2 M2's and a VP100 for a center I would go this route as the M2's will have better horizontal dispersion as Dean(grunt) mentioned. this wil help ensure all seating positions have better sound.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Opinions on using VP100 as stereo speakers
jakewash #309524 06/05/10 10:35 PM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
The VP center speaker tweeter is designed to have a horizontal dispersion when orientated correctly. Turning them on end defeats the whole design, so you would be better off purchasing a speaker designed to be vertical.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Opinions on using VP100 as stereo speakers
elsewhere #309527 06/05/10 11:34 PM
Joined: Aug 2007
Posts: 3,488
Likes: 9
connoisseur
Offline
connoisseur
Joined: Aug 2007
Posts: 3,488
Likes: 9
 Originally Posted By: elsewhere
because the symmetrical or horizontal nature of the speaker design makes it much easier to use in my living room where having horizontal speaker placement for me is difficult


To avoid too much confusion, could you please confirm that you meant "where having vertical speaker placement for me is difficult". Otherwise the post is a tad strange and can lead to stranger answers...


See Mojo's signature
Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 386 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4