Previous Thread
Next Thread
Print Thread
Rate Thread
Page 6 of 16 1 2 4 5 6 7 8 15 16
Re: Help choosing an in-wall component rack/shelf.
ClubNeon #333983 01/09/11 09:10 PM
Joined: Jun 2007
Posts: 4,357
connoisseur
OP Offline
connoisseur
Joined: Jun 2007
Posts: 4,357
Thanks, Chris. I've ordered speaker wire from them before, and am happy with it, but was rather surprised how much cheaper it was at Monoprice.

I found an interesting discussion on AVS regarding "Monoprice vs. Blue Jean Cables". It turned into somewhat of a heated discussion between two AVS club members. Surprisingly, Kurt, who is the owner of Blue Jean Cables, adds to the discussion. I was very surprised with his response; he seems like an honest, respectable, business person.

Here it is.


The only reasonable argument for owning a gun is to protect yourself from the police.
Re: Help choosing an in-wall component rack/shelf.
Ya_basta #333984 01/09/11 09:53 PM
Joined: Feb 2009
Posts: 3,466
connoisseur
Offline
connoisseur
Joined: Feb 2009
Posts: 3,466
I commented, not even really a complaint, about the build quality of one optical cable I got from Blue Jeans (it could have done with a little extra trimming, which I did myself) to Blue Jeans' support e-mail address. I got an e-mail back from Kurt, saying thanks for pointing out the issue. I was surprised the owner would take the time.

But yeah, there's really no difference in speaker cable (although their Canare 4S11, star quad is really nice, if you don't mind the garden hose size). It's the coax, and HDMI that is really well designed. I just buy their speaker cable too, because I like to support such a nice and honest company.


Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris
Re: Help choosing an in-wall component rack/shelf.
ClubNeon #333985 01/09/11 10:01 PM
Joined: May 2003
Posts: 18,044
shareholder in the making
Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
Garden hose size is cool.


I am the Doctor, and THIS... is my SPOON!
Re: Help choosing an in-wall component rack/shelf.
Ken.C #333986 01/09/11 10:14 PM
Joined: Feb 2009
Posts: 3,466
connoisseur
Offline
connoisseur
Joined: Feb 2009
Posts: 3,466
I'm still reading through that AVS thread. Someone just mentioned something important. I don't know how it is in Canada, but in the US wire run through walls must be CL rated. Blue Jeans states plainly which wire they sell is rated, and at what level.


Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris
Re: Help choosing an in-wall component rack/shelf.
ClubNeon #333987 01/09/11 10:41 PM
Joined: Feb 2009
Posts: 3,466
connoisseur
Offline
connoisseur
Joined: Feb 2009
Posts: 3,466
Oh, I knew this, but must have forgot. Canare is a Japanese company. Belden is American (not Belkin, which is Indian). Most everything Blue Jeans sells is based around Belden stock.


Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris
Re: Help choosing an in-wall component rack/shelf.
ClubNeon #333988 01/09/11 10:43 PM
Joined: Sep 2008
Posts: 4,116
connoisseur
Offline
connoisseur
Joined: Sep 2008
Posts: 4,116
Both the Monoprice and Blue Jeans cables will pass a signal just fine. If you are on a strict budget, then Monoprice is the obvious choice. Blue Jeans offers superior build quality (connectors especially) on their coax and HDMI and in some cases are "over built" for some home use applications. With robustness comes with it the tradeoff of stiffness and having BJC's best HDMI and 10 awg speaker wire, flexibility can be a problem. For professional use I would strictly use Blue Jeans cable for everything.


I’m armed and I’m drinking. You don’t want to listen to advice from me, amigo.

-Max Payne
Re: Help choosing an in-wall component rack/shelf.
BlueJays1 #334023 01/10/11 07:23 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
The in-wall rating in Canada is FT4 which is essentially the same as CL2. The FT4 rating only concerns vertical fire spread times, IIRC. CL2 deals with toxicity as well. If I remember a CL2 rating is slightly less than an FT4, a CL3 is pretty much the same.

Found this handy page:

http://www.awcwire.com/techlibrary/16.17.pdf


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Help choosing an in-wall component rack/shelf.
Ya_basta #334373 01/13/11 05:51 PM
Joined: Aug 2010
Posts: 31
S
enthusiast
Offline
enthusiast
S
Joined: Aug 2010
Posts: 31
Originally Posted By: wheelz999
Later on I plan on running 3.5 mm mono cables from the Logitech wireless extender to each component I need controlled; that way I can put the RF extender hidden in the cabinet. Until then, I just have to place it within line of sight of the cabinet, which shouldn't be a problem.


When I ran signal wire for an IR repeater I used 22/4 wire from Home Depot (only need 3 conductors). My repeater has screw terminals, so it was cheap and easy and you can customize for exact length.

I'm also using a 40' Monoprice HDMI cable and it works great. Note that it is pretty thick, so it has limited flexibility if you've got tight corners.

Re: Help choosing an in-wall component rack/shelf.
speedbump #335090 01/21/11 01:49 AM
Joined: Jun 2007
Posts: 4,357
connoisseur
OP Offline
connoisseur
Joined: Jun 2007
Posts: 4,357
Hey guys,

Well, after two days of work, my best friend and I have finished the first stage of my in-wall cabinet. I still have to get my cables and run them through the ceiling, do some cable management, close off the back of the cabinet, and put the aluminum face plates and trim on the front; but here's some pictures we took as we went.

Thank you very much for everyone's help. If you guys have any suggestions, fire away!

First picture-I haven't shown any pictures of my room because there's a couple things that aren't finished (like the fuse panel in the picture), but here's a teaser showing the cabinet that used to house my components. It's actually really beautiful, with glass shelves and wooden legs that match my speaker finish, but as you can see, the cables are messy.



Cabinet framed up and drywall cut out-



Back-





Front trimmed-



Shelves-





Last edited by wheelz999; 01/21/11 02:27 AM.

The only reasonable argument for owning a gun is to protect yourself from the police.
Re: Help choosing an in-wall component rack/shelf.
Ya_basta #335091 01/21/11 01:50 AM
Joined: Jun 2007
Posts: 4,357
connoisseur
OP Offline
connoisseur
Joined: Jun 2007
Posts: 4,357
Components on shelves-





Back-




The only reasonable argument for owning a gun is to protect yourself from the police.
Page 6 of 16 1 2 4 5 6 7 8 15 16

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 145 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4