Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Projector bulb replacement
#355850 09/30/11 12:28 PM
Joined: Jul 2005
Posts: 738
aficionado
OP Offline
aficionado
Joined: Jul 2005
Posts: 738
Hi Guys

My Panasonic projector bulb now has 2500 hours on it. Wow, 2500 hours in almost 5 years. Not bad (I think). Hmmm, that means I have wasted 2500 hours in my HT room over the past 5 years. Sounds awful when I put it that way. Kidding aside, I loved every minute of those 2500 hours.

Anyways, question is, do I wait for the bulb to burn out (blow) or do I be proactive and replace it before that happens. If it burns/blows out, will it damage the projector?

I have a replacement bulb here.

You advise is appreciated.

Thanks


paul

Axiom M80, VP180, Qs8, EP500
Epson 3020
Rotel RB-880
Denon AVR-990
Re: Projector bulb replacement
Worfzara #355851 09/30/11 01:02 PM
Joined: Feb 2002
Posts: 1,625
connoisseur
Offline
connoisseur
Joined: Feb 2002
Posts: 1,625
Well, we wait until the 'Replace Lamp' indicator comes on for what it's worth . . . found a place in Calgary that shipped super-fast, too!

Re: Projector bulb replacement
Amie #355855 09/30/11 01:48 PM
Joined: Sep 2004
Posts: 5,422
axiomite
Offline
axiomite
Joined: Sep 2004
Posts: 5,422
Since bulbs are pricey, I think that most people wait until they are completely shot. There is merit though in replacing it sooner. All light bulbs dim and color shift over time. Some will even say that there is a significantly less lumen output after 500 hours of projector use.

If you are still enjoying the display, I wouldn't change it. If you are remembering how the images used to be brighter, or "pop" more, then you may increase your enjoyment by replacing it sooner (or now).


Farewell - June 4, 2020
Re: Projector bulb replacement
nickbuol #355858 09/30/11 02:07 PM
Joined: Jan 2002
Posts: 3,270
connoisseur
Offline
connoisseur
Joined: Jan 2002
Posts: 3,270
Hi worfzara,

I'd wait until it either blows out, the replace projector-bulb warning comes on, or until you are bothered by the dimming of the image. If you remember those funny old CRT sets, even they would dim to about 50% or less of their original brightness over their typical 15-year life span.

I remember seeing a distinct loss of contrast and brightness after about 12 years viewing a 28-inch CRT set, but it happened so gradually that I didn't notice it until it became really gross.

Cheers,
Alan


Alan Lofft,
Axiom Resident Expert (Retired)
Re: Projector bulb replacement
alan #355859 09/30/11 02:12 PM
Joined: Sep 2004
Posts: 11,458
shareholder in the making
Offline
shareholder in the making
Joined: Sep 2004
Posts: 11,458
I, myself, have been dimming over the years while getting grosser.


::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
Re: Projector bulb replacement
MarkSJohnson #355860 09/30/11 02:17 PM
Joined: Aug 2009
Posts: 6,015
axiomite
Offline
axiomite
Joined: Aug 2009
Posts: 6,015
Late 50's, early 60's, my dad bought our fist color tv. It was a Philco. The color started dimming early on, and after about 3 months, it was a black and white tv. So much for early color tv's. The technology just wasn't ready yet, but they sold the products anyway.

Re: Projector bulb replacement
CatBrat #355866 09/30/11 03:41 PM
Joined: Feb 2006
Posts: 6,471
axiomite
Offline
axiomite
Joined: Feb 2006
Posts: 6,471
Laughing at Mark.

Cool story from CatBrat. I had no idea the first color sets faded on people.

I agree with Amie and Alan. For my Panasonic projector, I replaced the bulb after the warning came onscreen. I didn't notice any difference between the old and new bulbs, making me wish there was a way to defeat the warning, but at least I got 2700 hours out of it.

I found the cheapest Panasonic bulb - beware of counterfeits or off-brand bulbs - at B&H Photo in NYC. Great store, great web site.


Bears, beets, Battlestar Galactica.
Re: Projector bulb replacement
MarkSJohnson #355867 09/30/11 03:52 PM
Joined: Jan 2002
Posts: 3,270
connoisseur
Offline
connoisseur
Joined: Jan 2002
Posts: 3,270
Ha, ha! Excellent, Mark, although I did supply the setup line. .

My dad bought our first colour set around 1966 (there was about a 10-year delay in colour broadcasting coming to Canada). It was a 27-inch RCA hybrid "console", part solid-state and part vacuum-tube (in addition to the cathode-ray-tube display) and it proved to be pretty reliable for years. I don't recall the colours fading on that set but I was off on my own and not living at home.

Alan


Alan Lofft,
Axiom Resident Expert (Retired)
Re: Projector bulb replacement
medic8r #355868 09/30/11 03:54 PM
Joined: Aug 2006
Posts: 504
N
aficionado
Offline
aficionado
N
Joined: Aug 2006
Posts: 504
When a projector bulb goes, is the projector or TV pretty unresponsive. Like for example, even if you try to turn it on there is no indicator light or anything (obviously there can't be an picture)? The reason I ask, is my father-in-law has a Hitachi rear projection TV. He said that he didn't have a picture, so the first thought that I had was that the bulb needed to be replaced. He has had the TV for about 7 or 8 years and never replaced the bulb. I tried telling him that there was a bulb but be didn't seem to believe me. Anyways, he also said that there is no indicator light or anything on the front of the TV when you try to turn the power on. I suggested that he look for trouble shooting in the manual and if there isn't anything easy, then try to call Hitachi. He talked with a friend of his who suggested to just get a new TV, so he did.

This thread has just reminded me of this issue, since it was something pretty recent for my father-in-law and I'm still curious as to what the real problem was. Do you think that it was just the bulb? Or maybe a fuse? Or maybe something more difficult to fix?

Re: Projector bulb replacement
Nick B #355873 09/30/11 04:31 PM
Joined: Sep 2004
Posts: 5,422
axiomite
Offline
axiomite
Joined: Sep 2004
Posts: 5,422
It is possible that it is a bulb failure. Keep in mind that with rear projection TVs that they are pretty much a projector, reflective surface, and a screen. If the bulb goes out you are done. Most rear projection TVs are made under the same premise as other TVs that they are not user-serviceable. So there would be little or no indication to what the failure is.

Things may have changed more recently, but then again, who is buying (or selling) new rear projection anyway.

If there was no power at all (no sound) then it could have been a simple fuse, or maybe the power supply/transformer.


Farewell - June 4, 2020
Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 145 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4