Previous Thread
Next Thread
Print Thread
Rate Thread
QS8v2 on-wall mounting advice
#361959 12/27/11 07:06 PM
Joined: Jan 2009
Posts: 6
K
Karenna Offline OP
regular
OP Offline
regular
K
Joined: Jan 2009
Posts: 6
I USED to have my lovely QS8v2's standing on FMS-QS's. Everything was fine until the rugrats learned that knocking them over is oh-so-much-fun mad Thankfully, no injuries to the wee ones, or the speakers.

However, my husband has determined that they need to be wall/ceiling mounted, away from danger.

So, my first question is: which method should I use? I don't have the original wall brackets anymore, so I need to buy some of the wall or ceiling versions. Will either of those work with the v2's? Which is 'better'?

2nd question is, what is a good height to hang, if on-wall? Due to a wall oddity, I only have 16" of wall from the ceiling down. That would give about 7" from the top of the QS8 to the ceiling...is that enough?

Any thoughts are greatly appreciated!

Re: QS8v2 on-wall mounting advice
Karenna #361960 12/27/11 07:14 PM
Joined: May 2003
Posts: 18,044
shareholder in the making
Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
You might be able to buy some T brackets from Axiom--they might have some left. As for the full metal brackets, I think unless you know you want to mount them from the ceiling, the wall ones are better. The ceiling brackets leave very little space for the top woofer.


I am the Doctor, and THIS... is my SPOON!
Re: QS8v2 on-wall mounting advice
Ken.C #361985 12/28/11 12:22 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
That amunt of space is more than enough for the QS to 'breathe' I would opt for the original 'T' bracket first and if Axiom is unable to supply you with them I would get the Full Metal Bracket, these work very well. The Ceiling bracket works but leaves the bare minimum from the ceiling, about 3".


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: QS8v2 on-wall mounting advice
jakewash #362227 12/30/11 04:07 PM
Joined: Aug 2006
Posts: 504
N
aficionado
Offline
aficionado
N
Joined: Aug 2006
Posts: 504
The ceiling bracket is nice if you have a doorway or window to contend with and cannot mount them on the wall. I have ceiling mounts because I have both issues, in my living room, with 8 ft ceilings, and they work great. Even though there is only 3" of breathing room, I do not notice any acoustical differences compared to when I had the speakers wall mounted in a different orientation.

But, with 16 ft ceilings I definitely would not want to ceiling mount the speakers. They would not sound that great coming from way above you (not to mention the difficulties of trying to mount them that high anyways). So, Karena I agree with the other two, go with the wall mount.

Re: QS8v2 on-wall mounting advice
Nick B #362254 12/31/11 01:04 AM
Joined: Jan 2009
Posts: 6
K
Karenna Offline OP
regular
OP Offline
regular
K
Joined: Jan 2009
Posts: 6
Thanks for the advice guys, very much appreciated!
I'll give the boys at Ax a call tomorrow, and see what they can do wink

Re: QS8v2 on-wall mounting advice
Nick B #362255 12/31/11 01:13 AM
Joined: May 2010
Posts: 310
devotee
Offline
devotee
Joined: May 2010
Posts: 310
i have 4 QS8v2 speakers in my 7.1 system. 2 for surrounds and 2 for surround backs and they all work great. they are all placed based on a height of 3' from my seated listening position; all 4 speakers are that height. they are all mounted on the walls and work out incredibly well. the rears are 15' away from the sides and the effects are magical in 7.1 movies or matrixed 5.1 movies.


the two side surrounds use the T-brackets for mounting



the two rear surrounds use the power mounting brackets


here is a shot of 3 of the 4 speakers mounted in place. they look nice and they sound great on the wall. due to the construction of the walls and it's an old house i used surface molding and it came out really good. they generate an incredible sound field at the height they are mounted and really give the illusion of hugh open space. i don't think they need to be mounted much higher than 3' or so above your ear level in the listening position.

best of luck with whatever you do. please throw some pictures up when you do mount them as i'm sure folks would want to see it.


SonySXRD55"
Marantz AV7702MKII pre-amp
Emotiva XPA-5,UPA-2amps,
14 Speakers, All Axiom
Oppo 105D&93
Re: QS8v2 on-wall mounting advice
solarrdadd #362278 12/31/11 12:37 PM
Joined: Jan 2011
Posts: 1,291
J
connoisseur
Offline
connoisseur
J
Joined: Jan 2011
Posts: 1,291
a bit OT, solarrdadd, but please tell me the reason you have 2 Oppos.

Re: QS8v2 on-wall mounting advice
solarrdadd #362432 01/02/12 11:50 PM
Joined: Jan 2009
Posts: 6
K
Karenna Offline OP
regular
OP Offline
regular
K
Joined: Jan 2009
Posts: 6
I talked to the folks on Sat, and unfortunately, they're out of T brackets for the v2's. They suggested trying a drywall J bead, cut down to shape.

Any other thoughts for a home made version?

Anyone have any issues with the FMB's, if I end up going that route?

Re: QS8v2 on-wall mounting advice
Karenna #362447 01/03/12 03:01 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
The FMB's work great just more expensive than the 'T' brackets. I had my 3 QS8's mounted via FMB's and never had an issue with either of them.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 558 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4