Previous Thread
Next Thread
Print Thread
Rate Thread
Page 106 of 114 1 2 104 105 106 107 108 113 114
Re: Got Wood?
BobKay #413737 07/26/15 06:15 PM
Joined: May 2002
Posts: 5,745
Likes: 17
axiomite
Offline
axiomite
Joined: May 2002
Posts: 5,745
Likes: 17
Originally Posted By BobKay
What about ripping your own "edge banding" and affixing it with Tite Bond Exterior wood glue and using filament tape to "clamp" it?"

This was an idea that was brought up at the wood shop when i went looking for non-glued banding. The downside is twofold.
First, the only non-glued veneer i can get locally comes in 2 foot sheets or less. Hence i would have to 'patch' together 8 - 2 foot sections (i need about 16 feet of banding). This won't come out as nice or as easy to assemble as one single 16 foot piece. It would have alot of seams.

Second, i would have to rip 3/4" pieces off a 12" wide veneer sheet and with what?
I don't have all the great wood working tools of some on the forums. My cuts would likely be quite uneven requiring alot more trimming after application. That isn't as big a deal as point #1 of course. I probably could just use a box cutter and steel square to do the job.
One thing i should note, the wood shop only had 2 species of wood veneer sheets and one was oak (not happening). I think the other was maple, which might be ok, but the table top is cherrywood, so not a great match.

Ultimately the cost to do this isn't any less than possibly buying a single 20' strip of banding from a fellow on eBay who sells the non-glued material.
http://www.ebay.ca/itm/Curly-Figured-Map...k-/121178651930

And yes, when i do get around to the task, i will be using tape to 'clamp' it while the glue cures. I saw that tip on some woodworking master site. That's fantastic for this application b/c i don't have clamps wide enough to span the table top.

I thought i put up a pic on the past but if not, here is the table as finished 2 years ago. Most of the delamination has occurred on the right side of the table which as you can see from the photo is the location that gets the most direct sun.


Last edited by chesseroo; 07/26/15 06:16 PM.

"Those who preach the myths of audio are ignorant of truth."
Re: Got Wood?
MarkSJohnson #413738 07/26/15 07:14 PM
Joined: Jul 2009
Posts: 2,281
connoisseur
Offline
connoisseur
Joined: Jul 2009
Posts: 2,281
You need a pergola


DOG is GOD spelled backwards.
What others think of me is none of my business.
M80 V3 MY GLOSS Cherry
Re: Got Wood?
Gr8_White_North #413739 07/26/15 08:19 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
Originally Posted By Socketman
You need a pergola

Funny. I was thinking he needs a drink or six. Everything will look much better after that.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Got Wood?
MarkSJohnson #413741 07/26/15 08:48 PM
Joined: May 2002
Posts: 5,745
Likes: 17
axiomite
Offline
axiomite
Joined: May 2002
Posts: 5,745
Likes: 17
We contemplated a pergola, but it won't make much of a difference unless it had a cloth covered top which brings its own annoyances for wind tearing, mildew, bird crap...


"Those who preach the myths of audio are ignorant of truth."
Re: Got Wood?
MarkSJohnson #413742 07/26/15 11:06 PM
Joined: Jul 2009
Posts: 2,281
connoisseur
Offline
connoisseur
Joined: Jul 2009
Posts: 2,281
you need a drink or six smile


DOG is GOD spelled backwards.
What others think of me is none of my business.
M80 V3 MY GLOSS Cherry
Re: Got Wood?
chesseroo #413783 07/29/15 07:42 PM
Joined: Mar 2010
Posts: 3,596
Likes: 1
connoisseur
Offline
connoisseur
Joined: Mar 2010
Posts: 3,596
Likes: 1
Originally Posted By chesseroo
Originally Posted By BobKay
What about ripping your own "edge banding" and affixing it with Tite Bond Exterior wood glue and using filament tape to "clamp" it?"

This was an idea that was brought up at the wood shop when i went looking for non-glued banding. The downside is twofold.
First, the only non-glued veneer i can get locally comes in 2 foot sheets or less. Hence i would have to 'patch' together 8 - 2 foot sections (i need about 16 feet of banding). This won't come out as nice or as easy to assemble as one single 16 foot piece. It would have alot of seams.

Second, i would have to rip 3/4" pieces off a 12" wide veneer sheet and with what?
I don't have all the great wood working tools of some on the forums. My cuts would likely be quite uneven requiring alot more trimming after application. That isn't as big a deal as point #1 of course. I probably could just use a box cutter and steel square to do the job.
One thing i should note, the wood shop only had 2 species of wood veneer sheets and one was oak (not happening). I think the other was maple, which might be ok, but the table top is cherrywood, so not a great match.

Ultimately the cost to do this isn't any less than possibly buying a single 20' strip of banding from a fellow on eBay who sells the non-glued material.
http://www.ebay.ca/itm/Curly-Figured-Map...k-/121178651930

And yes, when i do get around to the task, i will be using tape to 'clamp' it while the glue cures. I saw that tip on some woodworking master site. That's fantastic for this application b/c i don't have clamps wide enough to span the table top.

I thought i put up a pic on the past but if not, here is the table as finished 2 years ago. Most of the delamination has occurred on the right side of the table which as you can see from the photo is the location that gets the most direct sun.



NOW he shows a picture. I re-read your posts and not once did I see the words "curve" or "arc." I hate you. :-) (Had to.)

And WTH business do you have even posting here if you don't own, at the very least, a table saw collecting, rather than making dust, let alone thousands of more dollars of other unused stuff that lives close by. Huh?! A PhD. w/o a (lonely) table saw! Pffffftt! What a waste!

Last edited by BobKay; 07/29/15 07:43 PM.

Always call the place you live a house. When you're old, everyone else will call it a home.
Re: Got Wood?
BobKay #413786 07/29/15 08:17 PM
Joined: May 2002
Posts: 5,745
Likes: 17
axiomite
Offline
axiomite
Joined: May 2002
Posts: 5,745
Likes: 17
Originally Posted By BobKay

NOW he shows a picture. I re-read your posts and not once did I see the words "curve" or "arc." I hate you. :-) (Had to.)


Hey Bob, the earth is not flat and not all tables are square.
...
discuss...

smile


"Those who preach the myths of audio are ignorant of truth."
Re: Got Wood?
MarkSJohnson #413787 07/29/15 09:04 PM
Joined: Sep 2004
Posts: 11,458
shareholder in the making
OP Offline
shareholder in the making
Joined: Sep 2004
Posts: 11,458
Originally Posted By Bobby
And WTH business do you have even posting here if you don't own, at the very least, a table saw collecting, rather than making dust, let alone thousands of more dollars of other unused stuff that lives close by.


:::Runs away crying:::

I KNOW you're talking about me!

Wait! I HAVE been using my tools! I've been building a platform bed that is helping me to gain valuable experience with cabinetry and face frames before I attempt to build the kitchen island!

Last edited by MarkSJohnson; 07/29/15 09:06 PM. Reason: Although, I admit, I'm on the computer now because I left the workshop to order more woodworking stuff from Amazon! :)

::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
Re: Got Wood?
MarkSJohnson #413788 07/29/15 09:10 PM
Joined: May 2002
Posts: 5,745
Likes: 17
axiomite
Offline
axiomite
Joined: May 2002
Posts: 5,745
Likes: 17
Originally Posted By MarkSJohnson

Wait! I HAVE been using my tools! I've been building a platform bed that is helping me to gain valuable experience with cabinetry and face frames before I attempt to build the kitchen island!

And yet you're a photographer who has posted no photos.
Fear the wrath of 'Square'Bob!!

smile


"Those who preach the myths of audio are ignorant of truth."
Re: Got Wood?
chesseroo #413792 07/29/15 11:12 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
SquareBob GodPants. Chess, your a genius!!


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Page 106 of 114 1 2 104 105 106 107 108 113 114

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 386 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4