Previous Thread
Next Thread
Print Thread
Rate Thread
Balanced vs RCA
#430171 09/30/18 03:31 AM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
OP Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
So I finally pulled the trigger on a pair of LFR1100's and an ADA1500-4 to drive them, and traded in a few of the speakers I had accumulated along the way.

At the time I ordered I hadn't realized that the optional XLR version of the DSP also included RCA in/out - thought it was one OR the other and my pre-amp doesn't have balanced outputs.

Predictably, I'm on the fence now re: whether it's worth upgrading to the XLR/RCA version so that I can run balanced cables between DSP and amplifier.

My first thought was "I don't live in a high-electrical-noise environment and the cable runs will be short" but that was quickly replaced with "it would be nice if I could keep most of the equipment closer to listening position, put the amp on the floor or a low stand between the speakers, and run 10-15 foot cables from the DSP to the amp.

Any suggestions on this ? Are any of you using balanced connections in their audio system today ? Am I better off with long DSP-to-amp cables or amp-to-speaker cables ? Am I over-thinking this ?

Thanks...

Last edited by bridgman; 09/30/18 03:45 AM.

M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: Balanced vs RCA
bridgman #430172 09/30/18 03:50 AM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Congrats! Did you consider an integrated box with DSP and amp?


House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated
Re: Balanced vs RCA
bridgman #430173 09/30/18 03:59 AM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
OP Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
Thanks... I've been wanting to try the LFR1100s for a while now.

When I started entering the order the plan was DSP with integrated amp - it seemed like too good a deal to pass up and I don't play at very high volumes - but in the end I weakened and went with the ADA1500-4.

Last edited by bridgman; 09/30/18 04:18 AM.

M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: Balanced vs RCA
bridgman #430174 09/30/18 04:18 AM
Joined: Jul 2009
Posts: 2,281
connoisseur
Offline
connoisseur
Joined: Jul 2009
Posts: 2,281
If you believe that speaker cables need to cost $1500 then you need balanced all the way. If not then your good to go with the RCA


DOG is GOD spelled backwards.
What others think of me is none of my business.
M80 V3 MY GLOSS Cherry
Re: Balanced vs RCA
bridgman #430175 09/30/18 04:18 AM
Joined: Jan 2007
Posts: 10,490
Likes: 116
M
shareholder in the making
Offline
shareholder in the making
M
Joined: Jan 2007
Posts: 10,490
Likes: 116
Does that mean you're not buying LFRs?


House of the Rising Sone
Out in the mid or far field
Dedicated mid-woofers are over-rated
Re: Balanced vs RCA
bridgman #430176 09/30/18 04:28 AM
Joined: Aug 2004
Posts: 6,379
Likes: 7
axiomite
OP Offline
axiomite
Joined: Aug 2004
Posts: 6,379
Likes: 7
Sorry, LFR1100's plus ADA1500...

ADA1500 instead of the ADA1000 integrated into the DSP.


M60ti, VP180, QS8, M2ti, EP500, PC-Plus 20-39
M5HP, M40ti, Sierra-1
LFR1100 active, ADA1500-4 and -8
Re: Balanced vs RCA
bridgman #430209 09/30/18 11:15 PM
Joined: Jul 2006
Posts: 12,077
Likes: 7
C
CV Offline
Founder, Axiom Upgrade Club
shareholder in the making
Offline
Founder, Axiom Upgrade Club
shareholder in the making
C
Joined: Jul 2006
Posts: 12,077
Likes: 7
Originally Posted By bridgman
So I finally pulled the trigger on a pair of LFR1100's and an ADA1500-4 to drive them, and traded in a few of the speakers I had accumulated along the way.


Congrats! Mine are still going strong, and I do love how the sound seems great across all seating positions in the times I'm not in the direct center. Because of how easy they were to place for good sound, however, I haven't spent much time playing with their positioning. One of these days I should really spend some hours dialing them in further.

I'm only using XLR connections between subwoofers, and it all starts with an RCA from my receiver, so I'm not actually getting a real balanced run. When I had an Integra pre-pro, it did noticeably reduce the noise I was hearing, but I don't currently have an issue with any hum, even just using RCAs. It probably helped having new electrical runs to the basement, with three dedicated circuits going to my HT/PC/network equipment. That being said, I prefer the XLR connections just because they're so much easier to connect and disconnect, as I've ruined RCA connections in the past with how much effort it took to remove the cables.


Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 145 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4