Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 3 1 2 3
AxiomAir won't start up after 2.10.1 upgrade
#431577 03/11/19 02:27 PM
Joined: Jun 2010
Posts: 33
E
enthusiast
OP Offline
enthusiast
E
Joined: Jun 2010
Posts: 33
Hey guys,

I need some help. After updating to 2.10.1, I turned off the Air and then powered up. I see the green light but I never get to the startup chimes. How do I troubleshoot this? It's been 20 min since the power up.

Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #431578 03/11/19 10:00 PM
Joined: Mar 2001
Posts: 1,375
Likes: 2
Ian Online Content
President
connoisseur
Online Content
President
connoisseur
Joined: Mar 2001
Posts: 1,375
Likes: 2
Hi everywhere,

If you tap the power button does your AxiomAir shut off in about 20 seconds?


Ian Colquhoun
President & Chief Engineer
Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #431580 03/12/19 09:35 PM
Joined: Feb 2018
Posts: 3
H
newbie
Offline
newbie
H
Joined: Feb 2018
Posts: 3
I'm in a similar boat - my 2.10.1 and 2.10.2 upgrades went well; but after the 2.10.3 upgrade I also see a green light and never get to hear the startup chimes. It shuts off in less than 20 seconds.

Please advise how to troubleshoot and fix. Thanks.

Re: AxiomAir won't start up after 2.10.1 upgrade
hoopaslotche #431583 03/13/19 04:37 AM
Joined: Mar 2001
Posts: 1,375
Likes: 2
Ian Online Content
President
connoisseur
Online Content
President
connoisseur
Joined: Mar 2001
Posts: 1,375
Likes: 2
Can you try the following and let me know if your AxiomAir comes back to life:

1. Format a USB drive between 4g and 32g with FAT32
2. Download this link to your computer: https://s3.amazonaws.com/axiom-air-install-files/AxiomAirV2/AxiomAir-V2103-Update.zip
3. Extract the downloaded file to the USB drive
4. Power down your AxiomAir
5. Plug the USB drive into any of your AxiomAir USB ports
6. Turn on your AxiomAir and wait for 5 minutes
7. Check to see if you are on version 2.10.3
8. Power down your AxiomAir and remove the USB drive


Ian Colquhoun
President & Chief Engineer
Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #431588 03/13/19 08:25 PM
Joined: Jun 2010
Posts: 33
E
enthusiast
OP Offline
enthusiast
E
Joined: Jun 2010
Posts: 33
Thanks I will try this tonight

Re: AxiomAir won't start up after 2.10.1 upgrade
Ian #431592 03/14/19 03:29 PM
Joined: Jun 2010
Posts: 33
E
enthusiast
OP Offline
enthusiast
E
Joined: Jun 2010
Posts: 33
So here is what I did. I downloaded the zip file. It contained only 1 .fir file which I assume is the firmware. I turned off my Air and then pulled out the WLAN usb and put in the USB stick that is formatted 2 gb FAT and had the .fir file on it. I connected it by ethernet cable and powered it on. I did not hear any start up chimes but I saw the green on indicator light. I left it alone all night. This morning I tried to connect to it using my AxiomAir app on my iphone and could not. I turned off the Air and turned it back on after waiting 5 seconds. I left it alone for an hour. I did not hear any startup chimes and I cannot connect to it using my iphone app.

It looks like my Air is dead frown What do I do now?

Last edited by elsewhere; 03/14/19 03:31 PM.
Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #431593 03/14/19 04:37 PM
Joined: Mar 2001
Posts: 1,375
Likes: 2
Ian Online Content
President
connoisseur
Online Content
President
connoisseur
Joined: Mar 2001
Posts: 1,375
Likes: 2
Looks like we will have to get serious now, LOL. I will PM you the instructions to reflash your SD Card.


Ian Colquhoun
President & Chief Engineer
Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #431600 03/15/19 01:07 AM
Joined: Feb 2018
Posts: 3
H
newbie
Offline
newbie
H
Joined: Feb 2018
Posts: 3
Ian - I've worked through the list in post #431583 with no success; my Air is dead too. Thx in advance for the SD reflash instructions.

Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #431621 03/16/19 06:10 PM
Joined: Jun 2010
Posts: 33
E
enthusiast
OP Offline
enthusiast
E
Joined: Jun 2010
Posts: 33
Hi All! Just posting an update. I reflashed according to Ian's directions.
My only quirk was that I had to power down and start two times in a row before I could play any music through the wifi connection even though I can see I am connected.

I'm now on 2.10.3 and the AxiomAir is working perfectly. I love this thing! smile .

Re: AxiomAir won't start up after 2.10.1 upgrade
Ian #433558 09/28/19 11:40 PM
Joined: Apr 2014
Posts: 1
L
newbie
Offline
newbie
L
Joined: Apr 2014
Posts: 1
Hi Ian,
I'm in the same boat after trying to update to 2.10.3, green power light only for days, no blue light. Please help. Thanks

Page 1 of 3 1 2 3

Moderated by  Andrew, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,396
Posts432,289
Members15,418
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,437
SirQuack 13,690
CV 11,815
MarkSJohnson 11,451
Who's Online Now
1 members (Ian), 202 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4