Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 4 1 2 3 4
Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #434803 12/17/19 09:49 AM
Joined: Oct 2012
Posts: 33
enthusiast
Offline
enthusiast
Joined: Oct 2012
Posts: 33
I left the AA after restart for well over 30mins. It didn’t come back to life. What’s your recommended next step?


Regards,

Shawzy44

M80 V3 | VP150 | EP125 | Denon 2809ci | Emotiva XPA-3 | 2 x AxiomAir N3 |
Re: AxiomAir won't start up after 2.10.1 upgrade
Shawzy44 #434804 12/17/19 12:36 PM
Joined: Dec 2001
Posts: 334
Likes: 5
Axiom Engineer
devotee
Offline
Axiom Engineer
devotee
Joined: Dec 2001
Posts: 334
Likes: 5
Originally Posted By Shawzy44
I left the AA after restart for well over 30mins. It didn’t come back to life. What’s your recommended next step?


If the green power LED is still on, hold the power button down until the LED goes out. Then wait a few seconds and press the power button again. If it does not re-boot you can follow the instructions above to re-program your SD card.

Re: AxiomAir won't start up after 2.10.1 upgrade
Mad Beggar #434810 12/17/19 09:15 PM
Joined: Aug 2016
Posts: 14
S
frequent flier
Offline
frequent flier
S
Joined: Aug 2016
Posts: 14
That worked! It ALL works! I'm flooded with sound!

Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #434814 12/18/19 12:50 AM
Joined: Mar 2008
Posts: 1,378
connoisseur
Offline
connoisseur
Joined: Mar 2008
Posts: 1,378
The only problem I have with the AxiomAir is an almost instantaneous dropout when I stop playing music using AirPlay. I plugged a Bluetooth dongle in it for now to keep the music going during parties, but of course the quality is not as good as WiFi. Hoping this will be fixed eventually.


LFR1100 Actives,QS10HPx2,QS8x2,EP800,M3x4,M3x2 (Wood),M5HPx2 (Wood),AxiomAir,ADA1500-8,ADA1500-7
Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #442858 07/19/21 10:44 AM
Joined: Jul 2021
Posts: 1
G
newbie
Offline
newbie
G
Joined: Jul 2021
Posts: 1
Is it possible to get the image for the latest version of the N3? I've tried the method and each time I'm trying to update to latest version i love connectivity at one of the updates. Would be nice to just make the SD card with the latest version..

Re: AxiomAir won't start up after 2.10.1 upgrade
guyzappa #444413 01/16/22 09:23 PM
Joined: Aug 2016
Posts: 14
S
frequent flier
Offline
frequent flier
S
Joined: Aug 2016
Posts: 14
me too. or three. or N3.
I had the green light goes out/no tones. Actually, it was like this for a long time now but finally got around to fixing it. I tried the usb stick FAT32 one extracted file, but no love. tried 6 times. tried without USB, weith, didn't matter.

I don't seem to have access to SD card from bottom slot, and there are maybe secure-torx screws along the side keeping it in place? I'd try the flashing SD if I could get in there.

Suggestions?

Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #444414 01/16/22 10:11 PM
Joined: May 2016
Posts: 7
R
regular
Offline
regular
R
Joined: May 2016
Posts: 7
the mini SD card is located inside the unit on the back side of the panel that needs to be removed by using an allen wrench to access it. Axiom supplied me with the allen wrench that works when they sent me the upgrade kit but a 5/32 will also work. The instructions can be found in the other thread.

Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #444415 01/16/22 10:33 PM
Joined: Aug 2016
Posts: 14
S
frequent flier
Offline
frequent flier
S
Joined: Aug 2016
Posts: 14
Thanks for the fast reply. We may have different models then. I can open the bottom panel screws with a 3mm allen key, but there's no SD card visible on the panel, or the circuit board underbelly that's visible after removing the panel. The switches and plugs that connect to the board on the back panel (USB, Ethernet, power, etc.,) are secured with a torx like screw with a pin in the middle, and this prevents pulling the board out to look on top.

Maybe this was an earlier model, S/N
47141011907001

Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #444416 01/17/22 12:37 AM
Joined: May 2016
Posts: 7
R
regular
Offline
regular
R
Joined: May 2016
Posts: 7
mine is an original model. got mine working though only through ethernet cable being in play. after 20 minutes it started to emit a strange odor and the panel door on the upper left side of the main panel door (when turned upside down was very warm to the touch. shut it all down and opened it up. it appears to be a battery or some power supply ( as I have not touched this thing in 4+ years I can't remember what the battery looks like and it looks like its leaking. It well could be the battery as the unit still powers up without it being attached. Stinks inside the cavity though.

Re: AxiomAir won't start up after 2.10.1 upgrade
elsewhere #444432 01/22/22 04:56 PM
Joined: Jan 2022
Posts: 2
C
newbie
Offline
newbie
C
Joined: Jan 2022
Posts: 2
Same problem with one of my two AxiomAir N3 speakers. After I tried to update it tom the most recent version, steady green light only and can see the speaker as part of my network. I am also using Bluetooth usb key which is not working either.
Speaker is on but can't use it anymore.
I have tried the procedure to reset to factory initial set up with no success.
Hope someone or Axiom tech can help me.
Thank you.

Last edited by Claude; 01/22/22 04:56 PM.
Page 3 of 4 1 2 3 4

Moderated by  Andrew, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 145 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4