Previous Thread
Next Thread
Print Thread
Rate Thread
Marantz SR7500, what could be the problem?
#341524 03/10/11 01:22 PM
Joined: Jul 2009
Posts: 288
mpyw Offline OP
local
OP Offline
local
Joined: Jul 2009
Posts: 288
Finally, I have the chance t o test the system that the previous owner left over in the ht room.

One weird problem, when connected the 7.1 speakers, the front L and R sound came out from the surround back speakers. I have switch the speakers connection and run the sound test and the sound are correctly coming out from the correct place.

However, when playing the dvd (tested a few), the front sound came out from the surround back.

The SR7500 surround connected to the surround back/multiple room/speaker c RCA speaker post, setting the speaker c (meant for zone 2) to either on or off does not corrected the error.

Will try to disconnect the back surr speakers and test again this Saturday.

Anyone having this weird problem?

Re: Marantz SR7500, what could be the problem?
mpyw #341564 03/10/11 05:53 PM
Joined: Feb 2009
Posts: 3,466
connoisseur
Offline
connoisseur
Joined: Feb 2009
Posts: 3,466
Check the settings for the back speakers. I know my Pioneer offers a "bi-amp" option, where they rears will play the same content as the fronts. It should be set to something like, "surround back, two speakers" (some offer an option to run a single rear, or none).


Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris
Re: Marantz SR7500, what could be the problem?
mpyw #341640 03/11/11 02:55 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Michael, your description of the problem was a little hard to follow. First, I assume that you mean that the front sound is coming out of both the front and back surround speakers, not just the back. Also, "switch the speakers connection" isn't clear.

The Speaker C setting(which isn't zone 2, it's the so-called "bi-amp" mentioned by Chris)should be set to off. If you have the speaker menu set up with the back surrounds shown as being there for 2 channel, the back surrounds should then only get sound intended for the back surrounds, not the front channels. An exception would be if you used an all-channel stereo mode which duplicates the front channels in the side and back surrounds.

So, recheck your settings to make sure that the back surrounds are set in the speaker setup menu.


-----------------------------------

Enjoy the music, not the equipment.


Re: Marantz SR7500, what could be the problem?
JohnK #341661 03/11/11 04:59 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Sounds like the rear channels are set to the bi-amp mode as the others have said, check the settings

page 19 and 23 of the manual kind of explain what to do:

http://us.marantz.com/us/Support/Pages/Manuals.aspx


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,943
Posts442,465
Members15,617
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 558 guests, and 4 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4