Previous Thread
Next Thread
Print Thread
Rate Thread
Sub Question
#303911 04/29/10 11:02 PM
Joined: Dec 2008
Posts: 6,928
Adrian Offline OP
axiomite
OP Offline
axiomite
Joined: Dec 2008
Posts: 6,928
Given a sub with *more* than one port, how is it that plugging one of the ports will make the sub reach lower? this seems counter intuitive to me. Anyone?


Half of communication is listening. You can't listen with your mouth.
Re: Sub Question
Adrian #303917 04/29/10 11:18 PM
Joined: Mar 2008
Posts: 1,378
connoisseur
Offline
connoisseur
Joined: Mar 2008
Posts: 1,378
Not a designer of the sub, but... Plugging a port will cause higher pressure inside of the cabinet which should cause greater driver excursion (at the expense of losing clarity of the higher frequencies).

Edited... I take that back. Plugging a port would cause the driver to work harder to "work". It's a good question, I'd like to hear the answer.

Last edited by SRoode; 04/29/10 11:23 PM. Reason: I'm a dumb-ass
Re: Sub Question
SRoode #303928 04/30/10 02:04 AM
Joined: Jan 2004
Posts: 13,840
Likes: 13
shareholder in the making
Offline
shareholder in the making
Joined: Jan 2004
Posts: 13,840
Likes: 13
I think the SVS cylinders offers this, maybe there website explains the purpose of plugging 1 or more ports.


M80s VP180 4xM22ow 4xM3ic EP600 2xEP350
AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85


Re: Sub Question
SirQuack #303929 04/30/10 02:30 AM
Joined: Dec 2008
Posts: 6,928
Adrian Offline OP
axiomite
OP Offline
axiomite
Joined: Dec 2008
Posts: 6,928
On Outlaw's website, they show the measurements with both ports open and one port plugged, with the plugged one going noticeably lower. I checked SVS site and Outlaw's site, they didn't really give any info on it other than the numbers.


Half of communication is listening. You can't listen with your mouth.
Re: Sub Question
SRoode #303932 04/30/10 03:02 AM
Joined: Apr 2003
Posts: 16,441
shareholder in the making
Offline
shareholder in the making
Joined: Apr 2003
Posts: 16,441
Let's do some math!

I found the following port-tuning formula on this page.



where

Lv is the length of your port in inches,
R is the inside radius of your vent tube,
Fb is the desired tuning frequency of your enclosure in Hertz,
Vb is the internal volume of your enclosure in cubic inches.

Solving the formula for Fb gives us



If the original sub design has two ports, plugging one port will only change one variable, R, effectively halving it. In this formula, you have an R^2 in the numerator and an R in the denominator. Without actually running the numbers, this relationship between the Rs should be enough to show you that halving the value of R will reduce the value of Fb, the desired tuning frequency.

Re: Sub Question
Adrian #303933 04/30/10 03:16 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Adrian, a ported sub has a lower tuned frequency than a sealed sub(other factors being equal)but rolls off at a rate of 24dB/octave below the tuned frequency while the sealed sub rolls off at 12dB/octave. Plugging one of two ports has the effect of moving the tuning part of the way toward being a sealed sub. The frequency where the sub begins to roll off is then actually higher, but because the roll-off is slower, the usable low frequency limit is extended. So, more output higher up with both ports open, but more extension with one plugged.


-----------------------------------

Enjoy the music, not the equipment.


Re: Sub Question
JohnK #303945 04/30/10 08:43 AM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
And thats exactly what happens. Same driver, same tuning same port lenght. The pink trace is a 1" smaller port.




Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Sub Question
fredk #303954 04/30/10 02:04 PM
Joined: Dec 2008
Posts: 6,928
Adrian Offline OP
axiomite
OP Offline
axiomite
Joined: Dec 2008
Posts: 6,928
Thanks for the input, Peter, John and Fred. That's interesting how much you can change the dynamics of the sub(or any ported speaker) by adjusting the port. So it would appear then, to generalize with all other parameters remaining the same...an "aggressively ported" box will have more bass support but drop off more quickly(not as low) and a more conservatively ported box would be a compromise between the two. Would it be safe to deduce that a sealed sub would go lower but on an even more gentle roll-off?


Half of communication is listening. You can't listen with your mouth.
Re: Sub Question
Adrian #304026 04/30/10 07:14 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
Well, that depends on the driver. In general, a ported design will go lower than a sealed design with the same driver.

However, some drivers will do very very well in a sealed design and with a lot of linear excursion can handle some very agressive eq to boost the low end.

It also depends what you believe about the audibility of distortion at low frequencies. Sealed subs tend to show more distortion the lower they go. EQing would further push up distortion.

Here is the same driver with two sealed models added. The one with the highest roll off is sealed with no boost. The blue line is with 6db of boost added at 25Hz. You can see that the ported designs outperfom sealed all around. This driver does best in a ported alignment though.



Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!
Re: Sub Question
fredk #304028 04/30/10 07:19 PM
Joined: Dec 2007
Posts: 7,786
axiomite
Offline
axiomite
Joined: Dec 2007
Posts: 7,786
To follow on, a ported design is more efficient because the driver is not: a) fighting a sealed air mass to achieve its excursion, b) more efficiently coupling with the air in your room. For a given level of power you will get more loudness and/or extension out of a ported design.

On the other hand, the sealed mass acts as a natural damper and you don't have to worry about a rumble filter to keep the driver from unloading at tuning.


Fred

-------
Blujays1: Spending Fred's money one bottle at a time, no two... Oh crap!

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 402 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4