I was just looking thru the subwoofers and noticed on the EP350 page near the bottom it says Compare all center speakers instead of compare all subs. Yes thats how bored I am right now.

http://www.axiomaudio.com/ep350_main.html

Yeah that's strange. It does say compare all center speakers at the bottom of the page. A new center perhaps? The vpep350.

No; the vpep350 is to be used only with the M50s. They get connected "between" the speaker-out terminals in the back of each M50. The jumpers shown in the back of the M50s are to be removed unless the vpep350 is used, then the proprietary, patent applied for, impedence matching, jumpers are installed.

It garners a hybrid "Phantom-Greater Dispersion" sound.

The jumpers were originally designed to be used to add an additional x-over to be able to add a remote 5.25 mid, time matching turned out to be unobtainable however, so the new center was developed.

More goofs.

On the reviews page, the goodsound review for the M22tis links to soundstage: not goodsound.

It's not boredom, just window shopping..

Actually, we should make it well understood, that with the products pages literally re-written and vastly improved just reciently, that we realise that some minor errors can, and will, make it through.

So please, don't take our spoofing seriously!

(However, if anyone else finds....)

Okay, I took a look and noticed that the M22 specs show a 3.5KHz crossover. Alan said some time ago that it was at 2.7KHz. The only one that I recall used to be in the 3.5KHz area was the old M2 with the 1/2" voice coil.

Thanks everyone for pointing these out. Tim's crunching hard to get the product pages all changed over - it's great when you point out things the rest of us have missed!

Thanks,

also the EP125 is missing from the subwoofer pages as is the m40's in the floorstanding pages.
Sean

Hmmm. The direct link to the EP125 still exists, but the M40 link is no longer there.

Amie:

Quick question or two for you please.

You list 2 VP-150s in your system. Could you please tell me how you use these (in parallel, two seperate systems, etc?) and how you like them.

Thanks In Advance.

The Rat.

another big goof that was there-they had the ep600 listed at-- 1750.00 usd/pair--i should have bought a pair before i called to tell them..i offered joe my shipping address to send my free ep600 for all the ones i saved them,but he was extremely good at avoiding that information.....hmmmmmmm .........i wonder why

We have the VP150s hooked up in parallel to an amp that's capable of driving four ohms. It works perfectly with our big screen because it centers the dialog right in the middle. We have them mounted with Full Metal Brackets so we were able to angle them perfectly.

Bernard, just in case the placement of Ian and Amie's VP150s isn't apparent, one is above the top center of the screen and the other is below the bottom center.