Looking for a cabinet for all my gear. Something along the lines of the StudioTech U-22T. The trouble is, the VP150 is 27.5" wide and there is very little I've found that has a center drawer/cabinet that wide.
Any one have a model they like?
Pricey and older style but I ended up w/ a Salamander Synergy because of the same problem. You can also get a riser to put a display above the VP150.
Thanks. I found this unit from BDI.
http://www.bdiusa.com/theater/avion_2_8929.shtmlIt's rough going as I have the VP150 to fit in a center slot and the Yamaha RX-Z11 to fit in one side.
The Z11 is 17.125" x 8.25" x 19.675” (W x H x D).
The VP150 is 27.5" x 7.5" x 7.5" (W x H x D).
How did you pull off the 27.5" center? The Synergy says each hole is only 19.75" wide.
Tom, how could I downgrade?!? Plus the VP150 is paid for!
This was a problem for me as well, i looked for a couple weeks before finding a cheaper one than anticipating. I had a budget of up to about 800 or so and only spent 400. It has a floating mount so i was able to raise it above the center and the shelves had enough clearance for air to move around the receiver. if your curious it was from 399sofastore.com and don't knock the name cause they were the only ones in Nashville who had what i needed.
edit for link
http://www.399sofastore.com/haviencrbysa.html
I have seen a few stands that the VP150 will fit into while looking through
here I just can't remember which models.
If you are looking for a cabinet that will fit the vp150, this is the one I have. It fits the 150 perfectly. You can also click the Lineart button near the top right to see the dimensions of the insides.
http://www.techcraft.net/4105/detail.asp?product_id=1636&category_id=284Price was $500 and it is well made.