how is it?
thanks.

I hear it's amazing from around here and the spot

Audiofan:

I don't have any outlaw mono blocks, but a buddy of mine does. They're outstanding and worth every penny of what they cost.

If your thinking about getting one or some, I would do so with pure confidence, as Tony the tiger would say they're Grrrreat!

Thanks all. I placed an order last night. Besides, i have 30 days try out at home. Any RCA do you recommend? Outlawaudio or Cobalt cable is expensive. I was just wondering whether the cables from those companies make big improvement? Otherwise, Dayton cable from Partsexpress work for me.

Fusion cables at 'rat shack' are real good quality. also, try blue jeans cables online, but they are kinda high also.

bigjohn

I have a pair of the M200's and love them. You won't regret it.

I do have a set of the Outlaw cables.I'm not sure if they make a difference in sound but the build quauity is A+.I bought some Dayton cables for a friend for Chrismas and by the looks of them I don't see how you could go wrong with them.For the price they are hard to beat.

I use the Dayton cables from PartsExpress. They're good quality cables at reasonable prices. I heartily recommend them.

I have a pair of Outlaw Monoblocks running from a NAD T753 to two M60s. They improved my sound a great deal with respect to dynamics.

They were quite easy to setup also. I bought cables from Outlaw for the setup. Like Axiom's cables, they are quality as well.

Enjoy!

You won't be disappointed. I have them running all seven channels and they have never failed to deliver. You will drive people from the room before you near their capacity, and I've never heard a single clip, even at reference levels and beyond.

Thanks everyone.
It's good to hear that you all like M200.I can't wait...
I think i'll go with Dayton cable since i need to order some other stuffs from Partsexpress too.

Anyone try to bi-amp M60 with 4 M200 yet? just curious....I tried bi-amp my denon 3805 by using the method described in Audioholics , but i don't like it very much. There is a slight hum coming from speaker.....well, it's just me.

thanks again.

Hi all,
I got 2 outlaw M200. it works great. Only one complaint is that there is a slight hum from transformer. after open the box, i connect power supply to the unit without connecting any device and I can hear the hum. I don't think this is a ground loop problem since I don't have any other devices connected to the outlet.

Does anyone experience this? And is there a way to prevent or reduce this hum? I hate to send back these amps.

thanks a lot.

Audiofan,

You should give Outlaw a call.
My M200's don't hum. Have you tested the outlet? Or tried another?

Yes, i disconnected all devices, except M200, but the hum is still there. I read this link http://www.6moons.com/audioreviews/outlaw/m200.html

So i'm not sure this is known to every M200 or just some defect that i have.
thanks