Previous Thread
Next Thread
Print Thread
Rate Thread
Page 9 of 14 1 2 7 8 9 10 11 13 14
Re: EP500 Not working
Robert_W #331773 12/16/10 09:34 PM
Joined: Jun 2007
Posts: 4,357
connoisseur
Offline
connoisseur
Joined: Jun 2007
Posts: 4,357
You might be able to get a kill-a-watt from your local utilities company as a lender for free; that's what I did anyway.


The only reasonable argument for owning a gun is to protect yourself from the police.
Re: EP500 Not working
ClubNeon #331774 12/16/10 09:34 PM
Joined: Jun 2008
Posts: 769
aficionado
Offline
aficionado
Joined: Jun 2008
Posts: 769
Originally Posted By: ClubNeon
I hooked a Kill-A-Watt up to my system and checked the standby power. I figured 28 Watts was a little high, but for a TV, receiver, PS3, and DVD player, plus two subs it didn't seem that bad.

Was the 28W with the subs in standby mode?


Bruno
M80s/VP180/QS8s/EP600/AVR-890
------------------------------------
"The problem is choice..."
Re: EP500 Not working
bdpf #331775 12/16/10 09:40 PM
Joined: Feb 2009
Posts: 3,466
connoisseur
Offline
connoisseur
Joined: Feb 2009
Posts: 3,466
Yep, the subs with their orange lights on instead of the green. With the greens glowing, yet no sound it was another 20 Watts on top of that.


Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris
Re: EP500 Not working
Argon #331776 12/16/10 09:44 PM
Joined: Jun 2007
Posts: 4,357
connoisseur
Offline
connoisseur
Joined: Jun 2007
Posts: 4,357
Originally Posted By: Argon
I believe that I remember reading somewhere in Axiom's literature that the amps are designed that way - they go into sleep mode in absence of a signal then wake up when a signal is received.


They go into sleep/standby mode, yes, but they still drain power.

I've never read anything stating that there are detrimental effects to turning the sub on and off when needed. My sub goes for long lengths of time without being used, so I'm going to pick up a remote on/off switch for it, rather than wasting power.


The only reasonable argument for owning a gun is to protect yourself from the police.
Re: EP500 Not working
Ya_basta #331778 12/16/10 10:06 PM
Joined: Feb 2009
Posts: 3,466
connoisseur
Offline
connoisseur
Joined: Feb 2009
Posts: 3,466
It's funny, people see my compact florescent lights, turning off my subs, and even my computer these days. They think I'm environmentally conscientious. Not really, I just don't like large electric bill. smile


Pioneer PDP-5020FD, Marantz SR6011
Axiom M5HP, VP160HP, QS8
Sony PS4, surround backs
-Chris
Re: EP500 Not working
ClubNeon #331802 12/17/10 02:43 AM
Joined: May 2006
Posts: 88
R
old hand
Offline
old hand
R
Joined: May 2006
Posts: 88
Well I just got off the phone and exchanged emails with JC. Very nice to deal with. New amp is on the way with one caveat. Apparently when I bought my EP600 it only had a 3 year warranty not 5 as now. However they are exchanging the amp with the newest version for $175 plus $30 shipping. Which I think is fair. So for $205 I have a new amp on the way.

I sure hope it fixes things cause I just plugged the thing back in and it's rumbling and crackling like crazy! I'm always second guessing things like maybe it could be the voice coil on the speaker too but it's doing the same thing that it did last time and the last revision and new amp had it working fine for the last 2 years or so. Lets hope i get more than 2 more years out of this next amp.

Anyway, kudos again to their customer service. They seem to be willing to do what ever it takes to make it right.

I'll let you know.

Re: EP500 Not working
Robert_W #331809 12/17/10 06:57 AM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Does that new amp come with the 5 year warranty since you are paying for it?


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: EP500 Not working
jakewash #331813 12/17/10 12:18 PM
Joined: Jun 2003
Posts: 678
aficionado
Offline
aficionado
Joined: Jun 2003
Posts: 678
Originally Posted By: jakewash
Does that new amp come with the 5 year warranty since you are paying for it?


Good question to ask!

Re: EP500 Not working
davidsch #331814 12/17/10 12:38 PM
Joined: Jan 2009
Posts: 349
D
Dduval Offline OP
devotee
OP Offline
devotee
D
Joined: Jan 2009
Posts: 349
Just an update,

Having listened to the newer upgraded version of my EP500 replacement amp for a few days now, I'm very pleased.

Could be placebo effect, but the replacement amp definitely seems to be controlling the woofer better. Low end seems tighter, smoother and more solid. I kept thinking it sounded different when listening to music, so I ran MultiXT32 again. Excellent so far...

I also notice that the green light stays on all the time, how do I know if, when it goes into standby mode? I thought the light changes when in standby mode?

Dana


M80's, QS8's, M22's, CHT SHO-10, Dual CHT SS-18.1's, Onkyo NR3008, Mitsubishi WD-73740
Re: EP500 Not working
Dduval #331815 12/17/10 12:50 PM
Joined: Sep 2004
Posts: 11,458
shareholder in the making
Offline
shareholder in the making
Joined: Sep 2004
Posts: 11,458
Dana, it may not be a placebo effect at all, considering the DSP programming might have been further tweaked from your original amp....


::::::: No disrespect to Axiom, but my favorite woofer is my yellow lab :::::::
Page 9 of 14 1 2 7 8 9 10 11 13 14

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,940
Posts442,457
Members15,616
Most Online2,082
Jan 22nd, 2020
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,840
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 402 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4