You are not logged in. [Log In]


Forums » General Discussion » Advice from Axiom Owners » supplied bracket or FMB with Q8's

Topic Options
Rate This Topic
#56059 - 07/29/04 04:13 PM supplied bracket or FMB with Q8's
mcad64 Offline
enthusiast

Registered: 07/23/04
Posts: 32
Loc: A Place to Stand, A Place to G...
Hi,
I was just wondering if most here mounted their QS8's with the supplied bracket or with a FMB? I heard space is tight in behind the supplied bracket that is why I ask. That and the fact that the QS8's by their nature don't need to be rotated or aimed just hanging flat along the wall correct?
Thanks,
Mike

Top
#56060 - 07/29/04 05:10 PM Re: supplied bracket or FMB with Q8's
ringmir Offline
aficionado

Registered: 02/03/04
Posts: 619
Loc: boston
They do not require the FMB. I would expect to use a bare wire connection on them if you go with the supplied bracket though. If you are hellbent on bananas or spades, You may want the FMB although I'm not sure that frees up the necessary space. Maybe someone else can speak to this.
_________________________
[black]-"The further we go and older we grow, the more we know, the less we show."[/black]

Top
#56061 - 07/29/04 10:36 PM Re: supplied bracket or FMB with Q8's
Capn_Pickard Offline
connoisseur

Registered: 03/09/04
Posts: 1056
Loc: Arlington, VA (NOVA)
by the way - how far apart are teh screw holes on the QS8 T brackets?

Top
#56062 - 07/29/04 11:57 PM Re: supplied bracket or FMB with Q8's
ringmir Offline
aficionado

Registered: 02/03/04
Posts: 619
Loc: boston
Just checked it out. The "T" is roughly like this:


-=-----=-
......|
......|


(ignore the .'s, I needed them for spacing.)
The top part is 9" across, the "=" representing the hooks where the speaker hangs. The center of the T extends 4" down, and the metal itself is .75" wide. This makes the dimensions 9" x 4.75". There are 5 holes spaced at 2" intervals across the top, and 3 holes (including the center hole in the top) spaced at 2" intervals down the center part.

I hope that makes sense.
_________________________
[black]-"The further we go and older we grow, the more we know, the less we show."[/black]

Top
#56063 - 07/30/04 09:01 AM Re: supplied bracket or FMB with Q8's
bigjohn Offline
connoisseur

Registered: 01/21/04
Posts: 3016
Loc: San Angelo, TX
good diagram ringmir.. good explanation..

i could almost see the T-bracket in my hand as i read it!!

bigjohn
_________________________
EXCUSE ME, ARE YOU THE SINGING BUSH??

Top
#56064 - 07/30/04 10:02 AM Re: supplied bracket or FMB with Q8's
DoubleJ230 Offline
buff

Registered: 04/15/04
Posts: 44
Loc: Huntsville, AL
There is a link on this page that has a picture of the bracket used with the QS8. Look on the right side for the link that says bracket. Hope that helps.
_________________________
Axiom Owner & War Eagle!!

Top
#56065 - 07/30/04 04:08 PM Re: supplied bracket or FMB with Q8's
Capn_Pickard Offline
connoisseur

Registered: 03/09/04
Posts: 1056
Loc: Arlington, VA (NOVA)
muchas gracis, amigos. That is a big help... I've got a unique mounting idea that required this info. As always - thanks for the prompt response. And yes, your diagram and explanation were very easy to follow and gave me the exact info that I needed.

cheers.

Top

Moderator:  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 
Forum Stats

15,224 Registered Members
15 Forums
23,992 Topics
424,052 Posts

Most users ever online:
883 @ 03/04/17 05:06 PM

Top Posters
Ken.C 18044
pmbuko 16437
SirQuack 13567
CV 11677
MarkSJohnson 11437
1 registered (wilwom)
68 Guests and
3 Spiders online.
Key: Admin, Global Mod, Mod
Newsletter Signup