Axiom Home Page Forums General Discussion Home Theater The wait is killing me

this is from the Onkyo website.

Amplifier Section

Power Output

Front L/R 130 W + 130 W (8 ohms, 20 Hz–20 kHz,
0.05%, 2 channels driven, FTC)
150 W + 150 W (8 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
160 W + 160 W (6 ohms, 1 kHz, 0.1%,
2 channels driven, FTC)

Center 130 W (8 ohms, 20 Hz–20 kHz, 0.05%,
2 channels driven, FTC)
150 W (8 ohms, 1 kHz, 0.7%, 2 channels
driven, FTC)
160 W (6 ohms, 1 kHz, 0.1%, 2 channels
driven, FTC)

Surround L/R 130 W + 130 W (8 ohms, 20 Hz–20 kHz,
0.05%, 2 channels driven, FTC)
150 W + 150 W (8 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
160 W + 160 W (6 ohms, 1 kHz, 0.1%,
2 channels driven, FTC)

Surround Back L/R 130 W + 130 W (8 ohms, 20 Hz–20 kHz,
0.05%, 2 channels driven, FTC)
150 W + 150 W (8 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
160 W + 160 W (6 ohms, 1 kHz, 0.1%,
2 channels driven, FTC)

Dynamic Power 300 W (3 ohms, 1 ch)
250 W (4 ohms, 1 ch)
150 W (8 ohms, 1 ch)

THD (Total Harmonic Distortion) 0.05% (Rated power)

Damping Factor 60 (Front, 1 kHz, 8 ohms)

Input Sensitivity and Impedance 200 mV/47 k-ohms (Line)
2.5 mV/47 k-ohms (Phono MM)

Output Level and Impedance 200 mV/470 ohms (Rec out)

Phono Overload 70 mV (MM, 1 kHz, 0.5%)

Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode)

Tone Control ±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble)

Signal-to-Noise Ratio 110 dB (Line, IHF-A)

Speaker Impedance 4 ohms–16 ohms or 6 ohms–16 ohms


I had seen other threads specifically about this combination and they mostly seemed to agree that it would work. One guy had even contacted Onkyo I believe. My room is 13*30*11.5. It is a open living room / kitchen. The AV stuff is at one end and the listening position is ~10 feet away. I'd like to play it loud but it is an apartment so I can't... I want a great system now, but more than anything I'm looking for really good bones for a proper theater in a couple years.

What is the verdict on the 805/m80 combo?