Originally Posted By: CV
 Originally Posted By: SRoode
Plus I was able to overclock each card by about 25%.


Did you replace the stock coolers to accomplish this? I think I'd be interested in replacing the stock fans for noise, if nothing else, but I've never done it on a video card.


Nope, just the standard cooler. They are actually quite good on this series. To get the 25% overclock (900 MHz), I had to bring the voltage up a bit to 1.15V. At this speed and voltage, I have the fan set to run at about 35% until the crad hits 60C, then it ramps up to about 55%. At 35% it is pretty quiet. At 55%, it is not so quiet, but the card is under load at this point so the sound of gaming drowns out the fan \:\)

At idle, the card is 52C with the overclock.


LFR1100 Actives,QS10HPx2,QS8x2,EP800,M3x4,M3x2 (Wood),M5HPx2 (Wood),AxiomAir,ADA1500-8,ADA1500-7