I just happen to have an allen wrench handy. Both the screw, and the washer came right out / off of my VP150. The washer on yours might have a small amount of the adhesive used to bond the vinyl to the cabinet holding it in place.
Try this, remove the allen screw, find a flat blade that fits snugly into the center of the washer. Insert the screwdriver into the washer, and gently rock it from side to side. (If you put the screwdriver in the hole vertically, rock the screwdriver up and down. If you put it in the hole horizontally, rock it from left to right.)
This should prevent you from inflicting any harm.
If that doesn't work, you can rent a jackhammer from your local tool rental shop.
I edited this after reading what twodan wrote. Maybe Axiom used 2 different kinds of blind nuts... Be careful trying my method if your's doesn't readily come off...
Good luck,
Last edited by Michael_A; 05/09/04 12:59 PM.
