Axiom Home Page Forums General Discussion Technical Questions Problem with HDMI

Strange issue with HDMI. When I plug my PS3 directly into the plasma (Samsung), everything works fine. When I plug it into the yammie rxv-1800, the sound is fine, but the samsung complains about "unsupported mode" and gives no picture.

I've replaced the cable [to clarify, the cable from the PS3], but it didn't change anything. Video from the mac mini has no problem.

Thoughts?

Regards,
David

I see the same error when my Samsung (LCD) sees 480i over HDMI.

I see the error "Unsupported Mode" with my Sony Media Center PC to Sony XBR2, though my PS3 works great connected to the LCD.
I use optical out for sound. The error goes away when i reboot the PC. Have not been able to figure it out.

--Avi

there were some issues i read about before with one of the onkyo models and the ps3, but not sure if there is some issue with the ps3 and your receiver or not.

Have you tried using a different hdmi input on the receiver?

Sounds like a "handshake" issue. The problem sometimes occurs (and will go away) depending on the order in which devices are turned on. After turning on the Yammy, have you tried recycling the PS3 off and on? Does that do anything? Also, make sure that you aren't trying to send a 1080p signal through component cables (downscaling using the Yammy). Not sure if downscaling to HDMI will cause problems.

Thats my first reaction. Unfortunately, a number of manufacturers don't seem to like using strait forward language when there are handshake issues.

MS Media center gives me bs about the video card being tied up by another resource. MS Media player says there is a problem with HDMI. Unfortunately this is all with standard def DVDs. Fortunately it dosn't happen very often. A reboot solves the problem.

Hi Avi,

Didn't realise the PS3 had optical out for sound. Do you know if you can play SACDs using the optical out? I got the impression from another thread that this only worked with HDMI output . . .

Regards,
David

As Capn_Pickard suggested try turning the PS3 off and back on again. And as terzaghi said try another HDMI input on the reciever, preferably one that is already working properly with another device.

Since the PS3 works when connected directly to the TV make sure you don’t have the receiver set to alter the video signal. Make sure you have the latest firmware updates for the receiver. Also if the PS3 auto-detects the resolution of the display try manually setting it to a resolution/mode you know the TV supports.

Everything I have read says SACD on the PS3 requires the use of the HDMI out. Although I have never tested it otherwise.

Hi David:

I have not tried a SACD..don't have any..maybe i will have to try.

--Avi