Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 8 1 2 3 4 5 6 7 8
Monoblocks and the M60
#301969 04/15/10 04:39 AM
Joined: Mar 2010
Posts: 63
T
TonyMc Offline OP
old hand
OP Offline
old hand
T
Joined: Mar 2010
Posts: 63
Hey all. While I'm patiently waiting on my Axiom M60s to get here(I'm 2-1/2 weeks into the 4 week wait. It's killing me)I've been thinking about what amp/s I'm going to use with these.
I have an Emotiva UPA-5 running my 5.1 system now, but will be moving to a 7.1 when the M60s come in.
I want to use monoblocks on the M60s. I've been looking at the UPA-1 and Outlaw m2200. I'm strongly leaning toward the m2200(especially with the sale going on), but I have a concern about the 1.7v needed for full output. I use a Yamaha RX-v665 as a pre-pro which only utilize a 1v preouts.
Can any math wizards here tell me what the output of the m2000 will be @ 1v?
Also, are the m2200 a good match to the M60?

Last edited by TonyMc; 04/15/10 04:40 AM.
Re: Monoblocks and the M60
TonyMc #301973 04/15/10 05:03 AM
Joined: May 2002
Posts: 10,654
shareholder in the making
Offline
shareholder in the making
Joined: May 2002
Posts: 10,654
Tony, I wonder if the maximum voltage output of the 665 is actually 1 volt. What's the source of that spec? Be that as it may, power is proportional to the square of the voltage(Ohm's Law), so if both those numbers(1.7 volts and 1 volt)are actually accurate, the relative maximum power outputs would be in the ratio of 1(squared)to 1.7(squared)or 1 to 2.89. The output with 1 volt input would be about 35% of the output with 1.7 volts.

As to a "good match", any good amplifier which is transparent works well. There's no sonic coloration produced by the amplification which would be harmful.


-----------------------------------

Enjoy the music, not the equipment.


Re: Monoblocks and the M60
JohnK #301997 04/15/10 01:57 PM
Joined: Mar 2010
Posts: 63
T
TonyMc Offline OP
old hand
OP Offline
old hand
T
Joined: Mar 2010
Posts: 63
 Originally Posted By: JohnK
Tony, I wonder if the maximum voltage output of the 665 is actually 1 volt. What's the source of that spec? Be that as it may, power is proportional to the square of the voltage(Ohm's Law), so if both those numbers(1.7 volts and 1 volt)are actually accurate, the relative maximum power outputs would be in the ratio of 1(squared)to 1.7(squared)or 1 to 2.89. The output with 1 volt input would be about 35% of the output with 1.7 volts.

As to a "good match", any good amplifier which is transparent works well. There's no sonic coloration produced by the amplification which would be harmful.


Thanks for the reply JohnK.
The source of the info is directly from the Yamaha site.
So in essence the M2200 hooked up to the RX-V665 will produce 130W? So we're talking an approx. 2 dB difference in output.
Great! I guess I'll go with the Outlaws.

Re: Monoblocks and the M60
TonyMc #302030 04/15/10 04:12 PM
Joined: Jul 2004
Posts: 1,443
connoisseur
Offline
connoisseur
Joined: Jul 2004
Posts: 1,443
Also, My speakers shipped about a week and a half early. I think Axiom has the same policy I try to live by...Underpromise, Overdeliver.


"A fanatic is someone who can't change his mind and won't change the subject" Churchill
Re: Monoblocks and the M60
Argon #302041 04/15/10 04:34 PM
Joined: Mar 2010
Posts: 63
T
TonyMc Offline OP
old hand
OP Offline
old hand
T
Joined: Mar 2010
Posts: 63
 Originally Posted By: Argon
Also, My speakers shipped about a week and a half early. I think Axiom has the same policy I try to live by...Underpromise, Overdeliver.


I hear ya Argon. I'm just chomping at the bit to hear them(and see them). I ordered the High gloss burled walnut. The finish seems pretty bold, but my wife is an aspiring interior decorator so it should look great with our decor. When I showed them to my wife she said oh, get those.

Re: Monoblocks and the M60
TonyMc #302046 04/15/10 04:43 PM
Joined: Jul 2004
Posts: 1,443
connoisseur
Offline
connoisseur
Joined: Jul 2004
Posts: 1,443
I'd consider keeping her if I were you. ;\)


"A fanatic is someone who can't change his mind and won't change the subject" Churchill
Re: Monoblocks and the M60
Argon #302055 04/15/10 05:12 PM
Joined: Dec 2003
Posts: 10,420
J
shareholder in the making
Offline
shareholder in the making
J
Joined: Dec 2003
Posts: 10,420
Tony be sure to post your thoughts on the performance of the M2200's many of us here, well I know I am one for sure, are looking to those as possible future purchases.


Jason
M80 v2
VP160 v3
QS8 v2
PB13 Ultra
Denon 3808
Samsung 85" Q70
Re: Monoblocks and the M60
jakewash #302067 04/15/10 07:25 PM
Joined: Mar 2010
Posts: 63
T
TonyMc Offline OP
old hand
OP Offline
old hand
T
Joined: Mar 2010
Posts: 63
 Originally Posted By: Argon
I'd consider keeping her if I were you. ;\)

She has put up with me for 15 yrs. so far.

 Originally Posted By: jakewash
Tony be sure to post your thoughts on the performance of the M2200's many of us here, well I know I am one for sure, are looking to those as possible future purchases.


Jake. I will.
I'm planning on putting my order in this afternoon when I get home so the amps will more than likely arrive before my Axioms come in, but I will hook them up to my current Polk Audio Monitor 50s and report back if I notice a difference between m2200 and the UPA-5.
I'll report back too ;\) when the Axioms arrive.

Re: Monoblocks and the M60
TonyMc #302069 04/15/10 07:39 PM
Joined: Mar 2010
Posts: 3,596
Likes: 1
connoisseur
Offline
connoisseur
Joined: Mar 2010
Posts: 3,596
Likes: 1
Tony: Got my M60's in Nov. (in maple semi-g). They look great, and the performance makes me late for every appointment I've had since I got 'em. And I'll vote for the Outlaw 2200's, too. The price/performance is unmatchable, especially at the moment. And yes, the wait for my speakers drove me mad.

I know many others will refute this. It is, afterall, anecdotal and not backed up with bench tests. I thought they sounded very disapponting out of the box. I left 'em receiving signal 24 hrs. for a few days. Happy, happy!


Always call the place you live a house. When you're old, everyone else will call it a home.
Re: Monoblocks and the M60
BobKay #302073 04/15/10 08:09 PM
Joined: Mar 2010
Posts: 63
T
TonyMc Offline OP
old hand
OP Offline
old hand
T
Joined: Mar 2010
Posts: 63
 Originally Posted By: BobKay
I know many others will refute this. It is, afterall, anecdotal and not backed up with bench tests. I thought they sounded very disapponting out of the box. I left 'em receiving signal 24 hrs. for a few days. Happy, happy!


I know what you mean Bob. I hear conflicting reports on break in/burn in. Also, I hear conflicting reports on monoblocks vs. multi channel as far as separation, sound stage, crosstalk, etc etc. Unfortunately I live in an area where we do not have shops that sell a lot of audio equipment for me to audition to make an educated decision so I research everything on the net and buy on blind faith. So far so good.

Page 1 of 8 1 2 3 4 5 6 7 8

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,984
Posts442,691
Members15,643
Most Online2,699
Aug 8th, 2024
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,849
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 595 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4