|
Equipment Cabinet
|
Joined: May 2006
Posts: 9
regular
|
OP
regular
Joined: May 2006
Posts: 9 |
Looking for a cabinet for all my gear. Something along the lines of the StudioTech U-22T. The trouble is, the VP150 is 27.5" wide and there is very little I've found that has a center drawer/cabinet that wide.
Any one have a model they like?
|
|
|
Re: Equipment Cabinet
|
Joined: May 2003
Posts: 2,185
connoisseur
|
connoisseur
Joined: May 2003
Posts: 2,185 |
Pricey and older style but I ended up w/ a Salamander Synergy because of the same problem. You can also get a riser to put a display above the VP150.
|
|
|
Re: Equipment Cabinet
|
Joined: Jun 2003
Posts: 8,488
axiomite
|
axiomite
Joined: Jun 2003
Posts: 8,488 |
Or just get a VP100.
bibere usque ad hilaritatem
|
|
|
Re: Equipment Cabinet
|
Joined: May 2006
Posts: 9
regular
|
OP
regular
Joined: May 2006
Posts: 9 |
Thanks. I found this unit from BDI. http://www.bdiusa.com/theater/avion_2_8929.shtmlIt's rough going as I have the VP150 to fit in a center slot and the Yamaha RX-Z11 to fit in one side. The Z11 is 17.125" x 8.25" x 19.675” (W x H x D). The VP150 is 27.5" x 7.5" x 7.5" (W x H x D).
|
|
|
Re: Equipment Cabinet
|
Joined: May 2006
Posts: 9
regular
|
OP
regular
Joined: May 2006
Posts: 9 |
How did you pull off the 27.5" center? The Synergy says each hole is only 19.75" wide.
|
|
|
Re: Equipment Cabinet
|
Joined: May 2006
Posts: 9
regular
|
OP
regular
Joined: May 2006
Posts: 9 |
Tom, how could I downgrade?!? Plus the VP150 is paid for!
|
|
|
Re: Equipment Cabinet
|
Joined: Apr 2010
Posts: 92
old hand
|
old hand
Joined: Apr 2010
Posts: 92 |
This was a problem for me as well, i looked for a couple weeks before finding a cheaper one than anticipating. I had a budget of up to about 800 or so and only spent 400. It has a floating mount so i was able to raise it above the center and the shelves had enough clearance for air to move around the receiver. if your curious it was from 399sofastore.com and don't knock the name cause they were the only ones in Nashville who had what i needed. edit for link http://www.399sofastore.com/haviencrbysa.html
Last edited by Nashvegas Rocks; 05/08/10 12:47 AM.
M22's VP100 QS4's SVS PB12-NSD Denon 2310CI Panasonic P58S2 Panasonic P50S2
|
|
|
Re: Equipment Cabinet
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
I have seen a few stands that the VP150 will fit into while looking through here I just can't remember which models.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: Equipment Cabinet
|
Joined: Feb 2007
Posts: 427
devotee
|
devotee
Joined: Feb 2007
Posts: 427 |
If you are looking for a cabinet that will fit the vp150, this is the one I have. It fits the 150 perfectly. You can also click the Lineart button near the top right to see the dimensions of the insides. http://www.techcraft.net/4105/detail.asp?product_id=1636&category_id=284Price was $500 and it is well made.
Last edited by DanielBMe; 05/11/10 01:15 PM.
|
|
|
Forums16
Topics24,945
Posts442,489
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
919
guests, and
4
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|