|
Re: Load distributing hitches
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
I wouldn't worry too much about the added strain on the frame, most of it is back into the trailer frame and really it isn't much different than the load on it already from the hitch/trailer themselves. To me the Load Distributing hitches are not really required as long as the trailer is loaded correctly, a LD/antisway setup using the cam system are where the benefits can be had. I would try the trailer without a LD hitch and if you find it sways a bit too much or the load shifts more than not, you might want to consider getting one, remember a LD hitch doesn't take the place of a properly loaded trailer but when things shift they are nice to have.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: Load distributing hitches
|
Joined: Dec 2008
Posts: 6,928
axiomite
|
OP
axiomite
Joined: Dec 2008
Posts: 6,928 |
Thanks, for the SERIOUS answer Jay(thumbs nose at other Cretins, jury still out on Bob). It's a dual axle trailer and the centre of gravity will probably be slightly in front of the 1st axle(nearest truck). Shifting shouldn't be a problem...we're talking about 20 or so bags of cement, 3-4 yards of sand in it's own separate container(attached to the trailer), and some relatively light machinery...fully loaded about 10,000lbs.
Half of communication is listening. You can't listen with your mouth.
|
|
|
Re: Load distributing hitches
|
Joined: Dec 2003
Posts: 10,420
shareholder in the making
|
shareholder in the making
Joined: Dec 2003
Posts: 10,420 |
All trailers have the CG in front of the axle, they track better this way, just like a caster on a shopping cart, the load is in front of the wheel. The problem comes from too much load in front and that takes weight off the tow vehicle steer tires making for hard steering and the possibility of trailer sway due to not enough load on the trailers own wheels, this is where the LD hitches come in to play. If the load is off it doesn't matter quite so much as the weight is redistibuted back onto each vehicles respective wheels, adding in the antisway system really cuts the chances of the trailer getting away.
Jason M80 v2 VP160 v3 QS8 v2 PB13 Ultra Denon 3808 Samsung 85" Q70
|
|
|
Re: Load distributing hitches
|
Joined: Jan 2004
Posts: 13,841 Likes: 13
shareholder in the making
|
shareholder in the making
Joined: Jan 2004
Posts: 13,841 Likes: 13 |
I will say that after testing our new travel trailer with and without the Equilizer 4 way anti sway system I would never live without, loaded properly or not. Makes a world of difference and sets you at ease. Neither wind or a passing semi going 70+ mpg sucks the trailer over more than 3-6" max.
M80s VP180 4xM22ow 4xM3ic EP600 2xEP350 AnthemAVM60 Outlaw7700 EmoA500 Epson5040UB FluanceRT85
|
|
|
Forums16
Topics24,947
Posts442,495
Members15,617
|
Most Online2,082 Jan 22nd, 2020
|
|
0 members (),
715
guests, and
1
robot. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|