Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
cutting pipe
#380501 07/22/12 12:03 AM
Joined: May 2003
Posts: 18,044
Ken.C Offline OP
shareholder in the making
OP Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
Anyone know how to cut 1 1/4" OD metal drain pipe without buying a $150 pipe cutter? I have a new sink drain that has a pipe that is alternately too short (without the little ziggy zag adapter) or too long (with the ziggy zag adapter). The trap and pipe to the wall is cast iron, and the sink is a pedestal style that is caulked to the floor and wall. Needless to say, the only part I want to move is the new drain.


I am the Doctor, and THIS... is my SPOON!
Re: cutting pipe
Ken.C #380503 07/22/12 01:07 AM
Joined: Feb 2004
Posts: 309
devotee
Offline
devotee
Joined: Feb 2004
Posts: 309
A reciprocating saw would be my first choice. A hacksaw would also work. There's also a flexible trap adapter that might be an option for you.


I started out with nothing & I've still got most of it left
M60 VP160 QS8 EP350
M22 VP100
Algonquins
Re: cutting pipe
Ken.C #380504 07/22/12 01:12 AM
Joined: May 2003
Posts: 18,044
Ken.C Offline OP
shareholder in the making
OP Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
Yeah, that's what I was talking about with the plastic zig zag thing. I think I'll try the hacksaw, then maybe the dremel. I don't have a reciprocating saw, so...

Fortunately, there seems to be a lot of wiggle room with how long I cut the pipe, since I've got that trap adapter.


I am the Doctor, and THIS... is my SPOON!
Re: cutting pipe
Ken.C #380505 07/22/12 02:47 AM
Joined: Feb 2004
Posts: 1,863
connoisseur
Offline
connoisseur
Joined: Feb 2004
Posts: 1,863
Ken, cutting iron with a dremel will be a pain, is it a time sensitive item? if not, then you could call a CNC machine shop they should have a metal cutting bandsaw. This would give you the cleanest cut.


I would guess a machine shop would cut the pipe for pretty cheap for you.


Having a sawzall around is never a bad thing.. I bought the biggest one Milwaukee makes, and use it for ALL kinds of random stuff around the house.

A hack saw will work, but you will have a worn out arm when your done. smile

Re: cutting pipe
Ken.C #380506 07/22/12 02:58 AM
Joined: May 2003
Posts: 18,044
Ken.C Offline OP
shareholder in the making
OP Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
No, this is the brass pipe that came with the drain plug--quite thin. Not doing the iron pipes!


I am the Doctor, and THIS... is my SPOON!
Re: cutting pipe
Ken.C #380507 07/22/12 03:05 AM
Joined: Feb 2004
Posts: 309
devotee
Offline
devotee
Joined: Feb 2004
Posts: 309
You'll have no problem cutting the brass with a hacksaw. I'll second the idea of having a sawsall on hand. It's one of the most versatile tools in my collection.


I started out with nothing & I've still got most of it left
M60 VP160 QS8 EP350
M22 VP100
Algonquins
Re: cutting pipe
Ken.C #380508 07/22/12 03:25 AM
Joined: Feb 2004
Posts: 1,863
connoisseur
Offline
connoisseur
Joined: Feb 2004
Posts: 1,863
Originally Posted By: Joe_in_SC
It's one of the most versatile tools in my collection.


I like my Sawzall more than my chainsaw... Probably because i get to use it quite a bit more, and don't have to be as careful with it...

Ken,
when you said Metal, and said it joined to a Iron pipe i though you were staying with Iron. If you have a vice, put the pipe in the vice when you use the hack saw, this will allow you to get the best possible cut given the tools at hand. Also, if you use the vice method, cut as close to the end of the vice as possible. This will allow you to use the end of the vice as a guide.

Re: cutting pipe
Ken.C #380516 07/22/12 12:42 PM
Joined: May 2003
Posts: 18,044
Ken.C Offline OP
shareholder in the making
OP Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
Thanks for the vice advice. I do have one, but I haven't attached it to the bench that's covered with junk yet. I guess I have another project for today. wink


I am the Doctor, and THIS... is my SPOON!
Re: cutting pipe
Ken.C #380517 07/22/12 01:09 PM
Joined: Feb 2004
Posts: 309
devotee
Offline
devotee
Joined: Feb 2004
Posts: 309
Projects beget more projects...and excuses to buy new tools.


I started out with nothing & I've still got most of it left
M60 VP160 QS8 EP350
M22 VP100
Algonquins
Re: cutting pipe
Ken.C #380518 07/22/12 01:19 PM
Joined: May 2003
Posts: 18,044
Ken.C Offline OP
shareholder in the making
OP Offline
shareholder in the making
Joined: May 2003
Posts: 18,044
Already bought a new pair of pliers for this one. Hoping to keep it to just that.


I am the Doctor, and THIS... is my SPOON!
Page 1 of 2 1 2

Moderated by  alan, Amie, Andrew, axiomadmin, Brent, Debbie, Ian, Jc 

Link Copied to Clipboard

Need Help Graphic

Forum Statistics
Forums16
Topics24,984
Posts442,691
Members15,643
Most Online2,699
Aug 8th, 2024
Top Posters
Ken.C 18,044
pmbuko 16,441
SirQuack 13,849
CV 12,077
MarkSJohnson 11,458
Who's Online Now
0 members (), 595 guests, and 0 robots.
Key: Admin, Global Mod, Mod
Newsletter Signup
Powered by UBB.threads™ PHP Forum Software 7.7.4