First, in anticipation of those who will assume you didn’t properly set up Audyessy here is the “’Official’Audyessy thread” with a detailed setup guide just in case.

http://www.avsforum.com/avs-vb/showthread.php?p=14456895#post14456895

Second, about your right main speaker. I’m guessing there’s probably not anything wrong. I’ve had speakers measure up to 2dB-3dB different just by moving the SPL meter a few inches in either direction if the speaker was near a wall or other object that sound waves could reflect off. Moving the speaker or seating or any objects near them could also effect it including adding/deleting a rug literally anything. Just angling the meter a little more toward or away from the speaker could change the reading 2dB. If you really suspect something is up with speaker check each driver to make sure it’s working. It’s possible wires got disconnected or the a driver just failed, but my guess it’s just a measurement anomaly. Also since you just now discovered it with the meter I’m guessing you never noticed it while listening. Meters and test/calibration equipment have driven many an enthusiast insane. ;\)

You’re findings about Audyssey sound similar to mine. I just don’t like what it does to my best recorded music. If you do rerun Audyssey I suggest you first tweak your setup to get it sounding the best you can to your ears w/o using EQ and then try Audyssey again to see if it helps. Also if you Denon was like mine it give the option of selecting several Audyssey curves of which I found the “Flat” curve did the least damage to good recordings.


3M80 2M22 6QS8 2M2 1EP500 Sony BDP-S590 Panny-7000 Onkyo-3007 Carada-134 Xbox Buttkicker AS-EQ1