Originally Posted By: RickF
Originally Posted By: CatBrat
After studying the picture of the mount on the wall, isn't the part that belongs in the speaker backwards? It looks like the little spikes were helping the speaker to separate from the bracket, instead of the other way around.

The threaded insert was probably inserted into the MDF from the inside of the speaker cabinet at the factory and the spikes are more than likely pointed in that direction to help with ease of installation ... I would imagine there was a larger head on the threaded insert that was used to help hold the insert in place with an indention in the MDF inside of the cabinet for the head. Looks to me like maybe the head broke loose from the rest of the insert.

Only my guess.


Dang Newf it's great to see you again ... it's been forever and I'm sorry to hear about the issue here.


I think you might be right. There is something inside my speaker rattling loose now. I need to take back off see what it is.


2xAA
M80/VP150/VP160/QS8
4xM3/M22OW/M2OW/VP150OW/4xM3IC/4xM3OW
EP500/800/HSU VTF3/SVS PB2k/SB2k/SB-12